www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES



CASE GRADERS



CASE 845 - NEXT PHOTOS



CASE 845 Grader



TECHNICAL DATA AND PHOTOS




Manufacturer: CASE

Model: CASE 845

Type: three axle motor grader


ENGINE

Model: Cummins 6BTA 5.9
Type: In-line, four-stroke, turbocharged, diesel engine.
Combustion system: direct injection
Cooling: water-cooled
Gross power SAE J1995: 112 kW (150 hp) at 2200 rpm
Net power SAE J1995: 104 kW (140 hp) at 2200 rpm
Maximum torque: 620 N·m (456 ft·lbs) at 1500 rpm
Number of cylinders: 6
Displacement: 5.9 L (359.9 in3)
Bore: 102 mm (4.02”)
Stroke: 120 mm (4.72”)


ELECTRICAL SYSTEM

Voltage: 24V, negative ground
Alternator: 70 amp (45 amp optional)
Batteries: 2 x Low-maintenance 750 CCA – 100 Ah (20 hr rate)
Lighting system:
Headlights: 2
Turn signals, front/rear; Stop/tail: 2
Rear mounted floods: 2
Front mounted floods: 2
Moldboard worklights: 2
Backup alarm: standard


SERVICE REFILL CAPACITIES

Cooling system: 40 L (10.5 gal)
Engine oil: 14.2 L (3.75 gal)
Engine oil with filter: 20 L (5.4 gal)
Hydraulic system – tank: 94.6 L (25 gal)
Hydraulic system – total: 200.3 L (53 gal)
Transmission: 25 L (6.6 gal)
Transmission with filter: 27 L (7.2 gal)
Circle gearbox: 2.8 L (2.9 qt.)
Rear axle center: 29 L (7.7 gal)
Total axle: 29 L (7.7 gal)
Tandem case, each: 28.7 L (7.6 gal)
Fuel tank: 341 L (90 gal)


TRANSMISSION

Type: Direct drive countershaft powershift with electronic shift control and inching pedal.
Pump flow: 91 L/min (24 gpm) at 2200 rpm
Sump: integral
Speeds: 8 forward/4 reverse
Shifting: single lever, bump style automatic electronic control
Diagnostics: onboard

Speeds:

Forward:
1st: 3.6 km/h (2.2 mph)
2nd: 5.1 km/h (3.2 mph)
3rd: 7.2 km/h (4.4 mph)
4th: 10.0 km/h (6.2 mph)
5th: 14.3 km/h (8.9 mph)
6th: 20 km/h (12.4 mph)
7th: 28.5 km/h (17.7 mph)
8th: 42.6 km/h (26.6 mph)

Reverse:
1st: 3.6 km/h (2.2 mph)
2nd: 7.2 km/h (4.4 mph)
3rd: 14.3 km/h (8.9 mph)
4th: 28.5 km/h (17.7 mph)


HYDRAULIC SYSTEM

Type: closed center, load sensing
Hydraulic pump: gear pump, fixed displacement, unloader valve
Load sense, variable discharge
Rated flow: 191.5 L/min (50.5 gpm) at 2200 rpm
Control valve: 9 sections
Side shift and pitch: hydraulic
Saddle: 5 positions
Moldboard: 3.65 m (12’)
Diagnostic quick couplers: 8


STEERING

Type: Hydrostatic power steering
Turns (lock-to-lock): 4.75
Pump capacity: 40.1 L/min (10.6 gpm) at 2200 engine rpm
Relief pressure: 140 bar (2030 psi)
145 bar (2100 psi) integral with steering unit
Cylinders: 2
63.5 mm bore x 266.7 mm stroke x 38.1 mm rod diameter
2.5” bore x 10.5” stroke x 1.5” rod diameter
Supplemental steering: integrated


ARTICULATION

Type: hydraulically activated (with lock valve)
Range: 25° left/right
Controls: hydraulic


POWERTRAIN

Rear axle: planetary
Differential: hydraulic lock, operator controlled
Outboard brakes: wet disc
Number of discs/brake: 5
Disc size: 360 mm x 255 mm (14.2” x 10”)
Tandems:
Type: welded plate
Oscillation: 20° each way
Front axle: eigh strength, welded steel
Ground clearance: 635 mm (25”)
Oscillation: 19° each direction
Wheel lean: 17.5° left/right
TIRES AND RIMS

Standard tires: 14.0 x 24 12PR TL G2 Firestone

Rims: 1-piece 227 mm x 610 mm (9” x 24”)

Optional tyres:
13.0 x 24-10 PR
13.0 x 24-12 PR
14.0 x 24-10 PR
16.0 x 24-12 PR
17.5 x 25-12 PR
17.5 x 25-16 PR


MAINFRAME

Type: All welded box
Front section:
Size: 254 mm x 298 mm (10.0” x 11.73”)
Weight: 153.3 kg/m (103.1 lbs-ft)
Rear section:
Size: 121 x 299 mm (4.75” x 11.75”)
Weight (each side): 78.3 kg/m (52.7 lbs-ft)


DRAWBAR

Type: “A” frame welded construction with center mounted circle turn motor
Ball and circle: shim adjustable


CIRCLE

Type: Welded construction
Diameter:
Maximum outside: 1752.6 mm (69.0”)
Vertical member: 1600.2 mm (63.0”)
Rotation: 360°
Speed: 1.2 rpm (7.2°/second)
Drive: hydraulic motor
Type: roller geroter
Displacement: 0.26 L/Rev 15.8 in3/Rev.)
Rated hydraulic flow: 94.6 L/min (25 gpm)


MOLDBOARD

Type: High-carbon steel
Shape: involute curve
Length: 3658 mm 12’ 0”
Height: 559 mm (22”)
Thickness: 22.2 mm (0.875”)
End bits: 2, interchangeable
Blade pitch positions:
Normal pitch: 47°
Minimum pitch: 42°
Maximum pitch: 87°
Blade shift:
Right: 686 mm (27.0”)
Left: 533 mm (21.0”)
Maximum bank cutting angle (right and left): 90°
Maximum ground penetration: 711.2 mm (28”)
Maximum lift above ground: 444.5 mm (17.5”)


OPTIONAL MOLDBOARDS

3962 mm x 22 mm (13 ft x .875 in)
4267 mm x 22 mm (14 ft x .875 in)


SCARIFIER

Type: Front mounted
Width of cut: 1168 mm (46”)
Teeth: 6 (11 optional)
Tooth spacing: 229 mm (9.0”), 114 mm (4.5”) optional
Lift above ground: 527 mm (20.75”)
Maximum penetration: 318 mm (12.5”)
Weight: 570 kg (1,256 lb) (includes front attachment group)


DOZER BLADE

Type: Front mounted
Width: 2762 mm (109”)
Height: 953 mm (37.5”)
Lift above ground: 622 mm (24.5”)
Penetration: 165 mm (6.5”)
Weight: 1165 kg (2,568 lb) (includes front attachment group)


REAR RIPPER

Type: Parallel
Ripper teeth: 3
Scarifier teeth: 5
Width of cut: 2120 mm (83.46”)
Lift above ground:
Ripper teeth: 518 mm (20.38”)
Scarifier teeth: 703 mm (27.67”)
Maximum penetration:
Ripper teeth: 437 mm (17.22”)
Scarifier teeth: 252 mm (9.43”)
Weight: 625 kg (1,375 lb)


DIMENSIONS (with standard tires)

Height to top of cab: 3340 mm (10‘ 11“)
Overall length: 8251 mm (27‘ 11“)
Overall length with front scarifier: 9376 mm
Overall length with front blade: 9476 mm
Overall length with rear ripper: 9426 mm
Overall length with front scarifier and rear ripper: 10 946 mm
Overall length with front blade and rear ripper: 11 046 mm
Blade (moldboard) width: 3658 mm (12‘ 0“)
Distance between outside edges of tires: 2510 mm (8‘ 3“)
Wheel tread: 2134 mm (7‘ 0“)
Tire radius — when static: 610 mm (2‘ 0“)
Blade (moldboard) base: 2562 mm (8‘ 5“)
Distance between tandem axles: 1594 mm (5‘ 2“)
Wheel base (center of front axle to center of rear tandem axles): 6219 mm (20‘ 5“)
Distance between front axle and rear end of machine: 7856 mm (25‘ 9“)
Outside tire turning radius: 7250 mm (23’ 9”)
Ground clearance (rear axle): 380 mm (14.9”)
Ground clearance (front axle): 622 mm (24.5”)


OPERATING WEIGHT
With 3.65 m (12 ft) moldboard, 79 kg (175 lb) operator, full fuel tank and standard equipment.

Operating weight: 13 535 kg (29,777 lb)
Weight, front axle: 3707 kg (8155 lb)
Weight, rear axle: 9828 kg (21,621 lb)
Blade pressure: 6635 kg (14,597 lb)


CASE 845 - Side slopes is no problem for the grader
CASE 845 - Side slopes is no problem for the grader.
The grader works on a road in Ciudadela Roldó, Malvas, El Oro Province, Ecuador.
Taken on: 4 January 2010
Size of the photo: 1920 x 1080 pixels, 1.69 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo, color corections.
The original photo is under the photo.


CASE 845 grader extending the road in Ciudadela Roldó, Malvas, El Oro Province, Ecuador
The CASE 845 grader extending the road in Ciudadela Roldó, Malvas, El Oro Province, Ecuador.
Taken on: 4 January 2010
Camera model: Canon EOS 20D
Size of the photo: 3504 × 2336 pixels, 4.07 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


CASE 845 grader at work
The CASE 845 grader at work.
The grader works on roads in Malvas, El Oro Province, Ecuador.
Taken on: 4 January 2010
Size of the photo: 1920 x 1080 pixels, 1.69 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo, color corections.
The original photo is under the photo.


CASE 845 grader extending the road in Ciudadela Roldó, Malvas, El Oro Province, Ecuador
The CASE 845 grader extending the road in Ciudadela Roldó, Malvas, El Oro Province, Ecuador.
Taken on: 4 January 2010
Camera model: Canon EOS 20D
Size of the photo: 3504 × 2336 pixels, 4.56 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader working in Ciudadela Roldó, Malvas, El Oro Province, Ecuador
The CASE 845 grader working in Ciudadela Roldó, Malvas, El Oro Province, Ecuador.
Taken on: 4 January 2010
Camera model: Canon EOS 20D
Size of the photo: 3504 × 2336 pixels, 4.75 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader clearing road in Pinas Grande, El Oro Province, Ecuador
The CASE 845 grader clearing a road in Pinas Grande, El Oro Province, Ecuador.
Taken on: 8 March 2010
Camera model: Canon EOS 20D
Size of the photo: 3504 × 2336 pixels, 4.56 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader clearing road in Pinas Grande, El Oro Province, Ecuador
The CASE 845 grader clearing the road in Pinas Grande, El Oro Province, Ecuador.
Taken on: 8 March 2010
Camera model: Canon EOS 20D
Size of the photo: 3504 × 2336 pixels, 3.85 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader at work in Pinas Grande, El Oro Province, Ecuador
The CASE 845 grader at work in Pinas Grande, El Oro Province, Ecuador.
Taken on: 8 March 2010
Camera model: Canon EOS 20D
Size of the photo: 3504 × 2336 pixels, 2.98 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


Road works in Ecuador
Road works in Ecuador, the road between Pinas and Pacha.
Pinas - Pacha, El Oro Province, Ecuador.
Taken on: 8 February 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.74 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


CASE 845 grader working on the road
The CASE 845 grader working on the road between Pinas and Pacha.
Pinas - Pacha, El Oro Province, Ecuador.
Taken on: 8 February 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.73 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


CASE 845 grader working on the road
The CASE 845 grader working on the road between Pinas and Pacha.
Pinas - Pacha, El Oro Province, Ecuador.
Taken on: 8 February 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.73 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo, color corections.
The original photo is over the photo.


The CASE 845 grader with the front scarifier
The CASE 845 grader with the front scarifier.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 28 June 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.74 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The front scarifier of the grader
The front scarifier of the grader.
Taken on: 28 June 2011
Size of the photo: 1104 × 1052 pixels, 489 kB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo.
The original photo is over the photo.


The CASE 845 grader working on a road
The CASE 845 grader working on a road.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 28 June 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.73 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader with the front scarifier
The CASE 845 grader with the front scarifier.
Taken on: 29 June 2011
Size of the photo: 1920 × 1080 pixels, 1.58 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo.
The original photo is under the photo.


The CASE 845 grader working on a road
The CASE 845 grader working on a road.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 29 June 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.73 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader works in Ecuador
The CASE 845 grader works in Ecuador.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 29 June 2011
Size of the photo: 1920 x 1080 pixels, 1.43 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo.
The original photo is under the photo.


The CASE 845 grader works in Ecuador
The CASE 845 grader works in Ecuador.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 29 June 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.74 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader with a rear scarifier
The CASE 845 grader with a rear scarifier.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 29 June 2011
Size of the photo: 1337 x 1054 pixels, 985 kB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo.
The original photo is under the photo.


The grader works in Ecuador
The grader works in Ecuador.
La Susaya - La Merced, El Oro Province, Ecuador.
Taken on: 29 June 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.71 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader works in Ecuador
The CASE 845 grader works in Ecuador.
La Inmaculada - Nuevo Amanecer, El Oro Province, Ecuador.
Taken on: 29 June 2011
Camera model: NIKON D90
Size of the photo: 3216 × 2136 pixels, 1.77 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader at work on a road in Ecuador
The CASE 845 grader at work on a road in Ecuador.
Pinas - San Francisco, El Oro Province, Ecuador.
Taken on: 24 November 2011
Camera model: Canon EOS REBEL T3
Size of the photo: 4272 × 2848 pixels, 5.90 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader working on road
The CASE 845 grader working on a road.
Pinas Grande - San Francisco, El Oro Province, Ecuador.
Taken on: 29 December 2011
Size of the photo: 2406 × 1881 pixels, 2.73 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0) Changes of the photo: The image was extracted from the original photo.
The original photo is under the photo.


The CASE 845 grader working on road
The CASE 845 grader working on a road Pinas Grande - San Francisco.
Pinas Grande - San Francisco, El Oro Province, Ecuador.
Taken on: 29 December 2011
Camera model: Canon EOS REBEL T3
Size of the photo: 4272 × 2848 pixels, 5.81 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)


The CASE 845 grader on road
The CASE 845 grader on a road at El Cisne.
El Cisne, El Oro Province, Ecuador.
Taken on: 25 January 2012
Size of the photo: 2109 × 1417 pixels, 2.25 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)
Changes of the photo: The image was extracted from the original photo.
The original photo is under the photo.


The CASE 845 grader on road
The CASE 845 grader on a road at El Cisne.
El Cisne, El Oro Province, Ecuador.
Taken on: 25 January 2012
Camera model: Canon EOS REBEL T3
Size of the photo: 4272 × 2848 pixels, 6.96 MB
Author of the photo (source): MunicipioPinas
License: (CC BY-SA 2.0)





CASE 845 - NEXT PHOTOS



CASE GRADERS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.