www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES



CASE SKID STEER LOADERS



CASE SV185 Tier 4



TECHNICAL DATA AND PHOTOS




Manufacturer: CASE

Model: SV185 Tier 4

Type: skid steer loader


ENGINE

Model: ISM N844LTA-DI-F-45
Type: in-line, four-stroke diesel engine
Fuel injection: direct, high pressure common rail HPCR
Air intake: turbocharged with wastegate and intercooled with external EGR
Cooling: water-cooled
Number of cylinders: 4
Displacement: 2.2 L (135.2 in3)
Bore: 84 mm (3.31 in)
Stroke: 100 mm (3.94 in)
Power SAE J1349:
Gross power: 44.7 kW (60 hp) at 2800 rpm
Net power: 42.4 kW (57 hp) at 2800 rpm
Peak torque: 183 Nm (135 lbft) at 1800 rpm
Fuel: #2 Diesel
Exhaust aftertreatment: diesel oxidation catalyst DOC
Engine emissions: Tier 4


ELECTRICAL SYSTEM

Alternator: 120 A
Starter: 2.0 kW (2.68 hp)
Battery: 12-volt low-maintenance 925 cold-cranking amps at -18 C (10 F)


SERVICE REFILL CAPACITIES

Engine oil with filter: 7.1 L (7.5 qt)
Hydraulic system tank: 16.3 L (4.3 US gal)
Hydraulic system total: 32.2 L (8.5 US gal)
Chain tanks per side: 7.4 L (1.95 US gal)
Fuel tank: 73.8 L (19.5 US gal)


HYDRAULIC SYSTEM

Implement pump type: gear

Displacement:
Standard aux.: 27.8 cm3 (1.7 in3)
High-flow aux.: 13.8 cm3 (0.84 in3)

Standard flow at rated engine RPM:
78.0 L/min (20.6 gpm) at 100% efficiency

Optional-high-flow at rated engine RPM:
116.2 L/min (30.7 gpm) at 100% efficiency

Loader control valve:
Type: 3 spool /open center /series - series
Relief pressure 3,050 psi (210 bar)

Port relief pressures:
Loader raise: 225 bar (3,263 psi)
Bucket curl. 260 bar (3,770 psi)
Bucket dump: 80 bar (1,160 psi)

Hydraulic lines:
Tubing: 37 JIC Flare
Loop hoses: SAE 100 R19

Hydraulic oil cooler:
Number of fins: 3.94 per cm (10 per inch)
Number of tube rows x columns: 9 x 1
Area: 843.2 cm2 (130.7 in2)

Hydraulic filter: Beta (4) = 75/spin on

Lift cylinders:
Bore diameter: 63.5 mm (2.50 in)
Rod diameter: 44.45 mm (1.75 in)
Stroke: 681 mm (26.81 in)
Closed length: 982 mm (38.66 in)

Bucket cylinders:
Bore diameter: 63.5 mm (2.50 in)
Rod diameter: 34.9 mm (1.38 in)
Stroke: 410 mm (16.14 in)
Closed length: 610 mm (24.02 in)


POWERTRAIN

Drive pump controls: direct mechanical
Pump to engine ratio: 1:1
Displacement: 35 cm3 (2.14 in3)
Flow at rated engine RPM:
95 L/min (25.1 gpm) at 97% efficiency
Charge pressure: 24.5 bar (360 psi)
System relief pressure: 345 bar (5,000 psi)

Drive pump controls: electro-hydraulic
Pump to engine ratio: 1:1
Displacement: 35 cm3 (2.14 in3)
Flow at rated engine RPM:
95 L/min (25.1 gpm) at 97% efficiency
Charge pressure: 24.5 bar (362 psi)
System relief pressure: 360 bar (5,220 psi)

Drive motors:
Maximum displacement: 325 cm3 (19.8 in3)
Displacement optional:
High speed 200 cm3 (12.2 in3)
Motor RPM at high idle and 97% efficiency:
Standard 1-speed: 313
Optional 2-speed: 443
Motor torque at maximum displacement and relief pressure:
Calculated at 345 bar (5,000 psi): 1783 Nm (1,315 lbft)

Final drive: single-reduction chain drive

Drive chain:
Size: ASA #80
Tensile strength 93.4 kN (21,000 lb)

Axles:
Torque at maximum displacement and relief pressure: 5940 Nm (4,381 lbft)
Diameter 50.8 mm (2.0 in)
Length 384.0 mm (15.1 in)


TRAVEL SPEED

Low range 11.9 km/h (7.4 mph)
High range optional: 17.4 km/h (10.8 mph)


BRAKE

Parking brake:
Type: Spring-applied, hydraulic release multiple disc.
Engagement: Depress on/off brake button on handle or instrument panel, raise seat bar, get off seat or stop engine.


PERFORMANCE SPECS
Rated operating capacity - measured using 1.68 m (66 in) foundry/excavating bucket.

50% of tipping load: 840 kg (1,850 lb)
50% of tipping load with additional counterweight: 885 kg (1,950 lb)

Tipping load: 1678 kg (3,700 lb)
Measured using 1.68 m (66 in) foundry/excavating bucket.

Breakout forces at 217 bar (3,150 psi):
Bucket cylinders: 24.7 kN (5,550 lb)
Lift cylinders hydraulic limit: 15.3 kN (3,450 lb)
Measured using 1.68 m (66 in) foundry/excavating bucket.

Cycle times:
Raise: 3.5 sec
Lower: 2.7 sec
Dump: 2.1 sec
Roll back: 1.5 sec


OPERATING WEIGHT

Operating weight: 2980 kg (6,570 lb)

Shipping weight: 2840 kg (6,270 lb)

Add-on weights:
Side cab glass: 21.3 kg (47 lb)
Polycarbonate cab door: 33.6 kg (74 lb)
Glass cab door w/ wiper 60.8 kg (134 lb)
Suspension seat 10.0 kg (22 lb)
Additional counterweight 63.5 kg (140 lb)


DIMENSIONS

Wheelbase: 1.13 m (44.4 in)

Overall length:
Without attachment with coupler: 2.69 m (105.7 in)
With foundry/excavating bucket on ground: 3.45 m (131.7 in)
with low profile bucket: 3.45 m (135.8 in)
with low profile extended bucket: 3.58 m (140.9 in)

Overall operating height:
with foundry/excavating bucket: 3.82 m (150.4 in)
with low profile bucket: 3.93 m (154.6 in)
with low profile extended bucket: 4.06 m (159.6 in)

Height to:
Bucket hinge pin: 3.05 m (120.0 in)
Top of ROPS: 1.97 m (77.7 in)
Bottom of level bucket, fully raised: 2.88 m (113.3 in)

Dump height:
with foundry/excavating bucket: 2.38 m (93.7 in) at 45
with low profile bucket: 2.31 m (90.7 in) at 45

Maximum dump angle: 51.9

Dump reach at maximum height with low profile bucket: 0.86 m (33.7 in) at 45

Clearance circle:
without bucket: 1.29 m (50.7 in)
with 1.68 m (66 in) foundry/excavating bucket in carry position: 2.02 m (79.6 in)
with 1.68 m (66 in) low profile bucket on ground: 2.13 m (83.9 in)
with 1.68 m (66 in) extended low profile on ground: 2.25 m (88.6 in)
Clearance circle rear: 1.60 m (62.9 in)
Rear axle to bumper: 0.92 m (36.4 in)
Tread gage with spec tires: 1.37 m (53.9 in)
Over the tire width with spec tires: 1.63 m (64.0 in)

Ground clearance bottom of belly pan: 0.18 m (7.0 in)


TIRES

Type - Size
Heavy-Duty - 10 L x 16.5
Premium - 10 L x 16.5
Premium-Lined - 10 L x 16.5
Severe Duty - 10 L x 16.5
Non-Pneumatic Solid - 10 L x 16.5
Heavy-Duty - 12 L x 16.5
Premium - 12 L x 16.5
Premium Lined - 12 L x 16.5


OPTIONAL BUCKETS

Dirt and Foundry - - Width - Weight - Heaped Capacity
66 in (1.68 m) - 385 lb (175 kg) - 14.8 ft3 (0.42 m3)
72 in (1.83 m) - 420 lb (190 kg) - 16.2 ft3 (0.46 m3)
78 in (1.98 m) - 440 lb (200 kg) - 17.7 ft3 (0.50 m3)

Low Profile - - Width - Weight - Heaped Capacity
66 in (1.68 m) - 440 lb (200 kg) - 13.4 ft3 (0.38 m3)
72 in (1.83 m) - 480 lb (218 kg) - 14.8 ft3 (0.42 m3)

Low Profile - - Width - Weight - Heaped Capacity
66 in (1.68 m) - 470 lb (214 kg) - 15.9 ft3 (0.45 m3)

Extended - - Width - Weight - Heaped Capacity
72 in (1.83 m) - 510 lb (232 kg) - 17.7 ft3 (0.50 m3)
78 in (1.98 m) - 540 lb (245 kg) - 19.1 ft3 (0.54 m3)
84 in (2.13 m) - 575 lb (262 kg) - 20.5 ft3 (0.58 m3)

Light Material - - Width - Weight - Heaped Capacity
72 in (1.83 m) - 475 lb (216 kg) - 23.3 ft3 (0.66 m3)
84 in (2.13 m) - 540 lb (245 kg) - 27.5 ft3 (0.78 m3)

Manure & Slurry - - Width - Weight - Heaped Capacity
72 in (1.83 m) - 480 lb (218 kg) - 19.1 ft3 (0.54 m3)
84 in (2.13 m) - 545 lb (248 kg) - 22.6 ft3 (0.64 m3)

Heavy-Duty - - Width - Weight - Heaped Capacity
66 in (1.68 m) - 450 lb (205 kg) - 13.1 ft3 (0.37 m3)
72 in (1.83 m) - 510 lb (230 kg) - 14.1 ft3 (0.40 m3)
78 in (1.98 m) - 530 lb (240 kg) - 15.5 ft3 (0.44 m3)
84 in (2.13 m) - 550 lb (250 kg) - 17.0 ft3 (0.48 m3)

Heavy-Duty - - Width - Weight - Heaped Capacity
66 in (1.68 m) - 520 lb (235 kg) - 16.6 ft3 (0.47 m3)

With spillguard - - Width - Weight - Heaped Capacity
72 in (1.83 m) - 585 lb (265 kg) - 18.4 ft3 (0.52 m3)
78 in (1.98 m) - 605 lb (275 kg) - 19.8 ft3 (0.56 m3)
84 in (2.13 m) - 640 lb (290 kg) - 21.5 ft3 (0.61 m3)


CASE SV185 Tier 4 skid steer loader
CASE SV185 Tier 4 skid steer loader.
Taken on: 17 March 2018
Camera model: NIKON D7200
Size of the photo: 6016 x 4016 pixels, 6.40 MB





CASE SKID STEER LOADERS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.