www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


CATERPILLAR - CRAWLER DOZERS



CATERPILLAR D10R (3KR 1995-2002)



TECHNICAL DATA AND PHOTOS



Manufacturer: Caterpillar Inc.
Type: large crawler dozer
Model: D10R (3KR)

Year of production: 1995-2002
Total produced:
CAT D10R 3KR (1995-2002): 1863

ENGINE:
Model: 3412E
Type: V-12 65°, 4-stroke-cycle diesel, turbocharged with intercooler.
Number of cylinders: 12
Displacement 27 liters (1,647.6 in3)
Bore: 137.2 mm (5.4 in)
Stroke 152.4 mm (6 in)
Power:
Gross power: 457 kW (613 hp)
Net power - Caterpillar: 425 kW (570 HP) at 1900 rpm
Net power - ISO 1585: 425 kW (570 HP) at 1900 rpm
Net power - SAE J1349: 421 kW (564 HP) at 1900 rpm
Net power - EU 80/1269: 425 kW (570 HP) at 1900 rpm
Net power - DIN 70020: 590 HP at 1900 rpm

FLUID CAPACITIES:
Engine crankcase with oil filters: 60 L
Cooling system: 132 L
Power train: 189 L
Final drives (each): 23 L (6.1 gal)
Roller frames (each): 90 L (23,8 gal)
Pivot shaft compartment: 30,3 L (8 gal)
Hydraulic tank: 108 L
Fuel tank: 1109 L (293 gal)


ELECTRICAL SYSTEM:
Alternator: 75 A
Batteries: 2 x 12 V, 190 Ah
Lighting system: halogen (2 forward, 2 rear)


HYDRAULIC SYSTEM:
Pump type: gear
Lift cylinder flow: 408 L/min (108 gal/min)
Tilt cylinder flow: 121 L/min (32 gal/min)
Bulldozer relief valve setting: 18 616 kPa
Tilt cylinder relief valve setting: 19 300 kPa
Ripper (lift) relief valve setting: 18 616 kPa
Ripper (pitch) relief valve setting: 18 616 kPa
Hydraulic tank: 108 L


UNDERCARRIAGE:
Width of shoe: 610 mm (24 in)
Number of shoes (each side): 44
Grouser height: 93 mm (3.7 in)
Pitch: 260 mm (10.2 in)
Track gauge: 2 550 mm (100.4 in)
Length of track on ground: 3 885 mm (12 ft 9 in)
Ground contact area: 4.7 m2 (7,326 in2)
Ground clearance: 615 mm (24.2 in)


MAXIMUM SPEED:
Forward: 12.5 km/h (7,7 mph)
Reverse: 15.6 km/h (9,7 mph)


DIMENSIONS:
Track gauge: 2 550 mm (100.4 in)
Track width with 610 mm (24 in) shoes: 3 160 mm
Length of track on ground: 3 885 mm
Height - FOPS cab: 4 102 mm
Height - ROPS/canopy: 4360 mm
Overall length basic tractor: 5331 mm
Length with SU-Blade: 7 500 mm
Length with SU-Blade and single-shank ripper: 9 392 mm
Length with SU-Blade and multi-shank ripper: 9 217 mm
Length with U-Blade: 7 754 mm
Length with U-Blade and single-shank ripper: 9 646 mm
Length with U-Blade and multi-shank ripper: 9 471 mm
Ground clearance: 615 mm


BLADE 10SU :
Blade capacity (SAE J1265): 18.5 m3 (24.2 yd3)
Width with blade (over end bits): 4862 mm
Blade height: 2 119 mm
Maximum digging depth: 674 mm (26.5 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 993 mm (39.1 in)
Weight without hydraulic controls: 10 228 kg


BLADE 10SU ABR:
Blade capacity (SAE J1265): 18.5 m3 (24.2 yd3)
Width with blade (over end bits): 4862 mm
Blade height: 2 119 mm
Maximum digging depth: 674 mm (26.5 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 993 mm (39.1 in)
Weight without hydraulic controls: 11 069 kg


BLADE 10U :
Blade capacity (SAE J1265): 22.0 m3 (28.7 yd3)
Width with blade (over end bits): 5 263 mm
Blade height: 2 119 mm
Maximum digging depth: 674 mm (42.3 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 1074 mm (39.1 in)
Weight without hydraulic controls: 10 737 kg (23.775 lb)


BLADE 10U ABR:
Blade capacity (SAE J1265): 22.0 m3 (28.7 yd3)
Width with blade (over end bits): 5 263 mm
Blade height: 2 119 mm
Maximum digging depth: 674 mm (42.3 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 1074 mm (39.1 in)
Weight without hydraulic controls: 12 152 kg


SINGLE-SHANK RIPPER:
Maximum penetration force (shank vertical): 205 kN
Maximum penetration (standard tip): 1370 mm
Pry out force: 429 kN
Maximum clearance raised (under tip, pinned in bottom hole): 1070 mm
Number of pockets: 3
Weight (without hydraulic controls): 7117 kg (15.690 lb)


MULTI-SHANK RIPPER:
Maximum penetration force (shank vertical): 205 kN (46.086 lb)
Maximum penetration (standard tip): 941 mm
Pry out force: 429 kN (96.360 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 1070 mm
Number of pockets: 2
Weight (without hydraulic controls): 6919 kg (15.734 lb)
Weight of one shank: 524 kg


OPERATING WEIGHT:
Operating weight includes hydraulic controls, blade tilt cylinder, full fuel tank, coolant, lubricants, ROPS/FOPS cab, 610 mm (24 in) shoes and operator:

Operating weight with 10SU blade and single-shank ripper:
65 764 kg

Operating weight with 10SU blade and multi-shank ripper with one shank: 65 566 kg

Operating weight with 10SU blade and multi-shank ripper with two shank: 66 090 kg (147.723 lb)

Operating weight with 10SU blade and multi-shank ripper with three shank: 66 614 kg

(Weight of one shank of the multi shank ripper: 524 kg)

Operating weight with 10U blade and single-shank ripper:
66 273 kg

Operating weight with 10U blade and single-shank ripper with one shank: 66 075 kg

Operating weight with 10U blade and single-shank ripper with two shank: 66 599 kg (147.723 lb)

Operating weight with 10U blade and single-shank ripper with three shank: 67 123 kg

(Weight of one shank of the multi shank ripper: 524 kg)


SHIPPING WEIGHT:
Shipping weight includes coolant, lubricants, 20% fuel, ROPS without cab, and 610 mm (24 in) shoes.
Shipping weight: 47 174 kg


CATERPILLAR D10R large crawler dozer
CATERPILLAR D10R 3KR - 1995-2002, large crawler dozer.
Location: Podkrušnohorské Technical Museum - history of mining and processing of coal in the central part of the North Bohemian lignite basin, the Czech Republic.
Taken on: 31 July 2014
Size of the photo: 3648 × 2736 pixels, 2.65 MB
Photographer: Hadonos
License : (CC BY-SA 3.0)


CATERPILLAR D10R large crawler dozer
CATERPILLAR D10R 3KR - 1995-2002, large crawler dozer.
Location: New Zealand
Size of the photo: 720 × 540 pixels, 311 kB
Author of the photo: John Welsh
License: (CC BY-SA 2.0)



CATERPILLAR D10R large bulldozer
CATERPILLAR D10R 3KR - 1995-2002, large bulldozer.
Location: New Zealand
Date of the photo: 18 November 2015
Size of the photo: 5472 × 3648 pixels, 4.51 MB
Camera model: SAMSUNG NX1000
Author of the photo: John Welsh
License: (CC BY-SA 2.0)



CAT D10R bulldozer, front view
CAT D10R bulldozer, front view.
Location: New Zealand
Date of the photo: 18 November 2015
Size of the photo: 2348 × 1926 pixels, 2.22 MB
Author of the photo: John Welsh
License: (CC BY-SA 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under this photo.


Two CAT bulldozers
Two CAT bulldozers.
Location: New Zealand
Date of the photo: 18 November 2015
Size of the photo: 5472 × 3648 pixels, 4.51 MB
Camera model: SAMSUNG NX1000
Author of the photo: John Welsh
License: (CC BY-SA 2.0)






CATERPILLAR - CRAWLER DOZERS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.