www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


CATERPILLAR - PNEUMATIC ROLLERS



CATERPILLAR PS150C




TECHNICAL DATA AND PHOTOS

Model: PS150C
Manufacturer: CATERPILLAR
Type: pneumatic compactor (roller)


ENGINE:

Model: Caterpillar 3054C
Type: four-stroke cycle, turbocharged diesel engine.
Gross power: 75 kW (100 hp) at 2200 rpm
Net power ISO 9249: 72 kW (96 hp) at 2200 rpm
Net power SAE J1349: 72 kW (96 hp) at 2200 rpm
Net power EEC80/1269: 72 kW (96 hp) at 2200 rpm
Number of cylinders: 4
Displacement: 4.4 liters (269 cu in)
Bore: 105 mm (4.13")
Stroke: 127 mm (5")
Engine emissions: U.S. EPA Tier 2


SERVICE REFILL CAPACITIES:

Fuel tank: 173 liters (45.6 US gallons)
Note: Actual fuel tank capacity is 162 liters (42.8 gal).
Hydraulic tank: 54,9 liters (14.5 US gallons)
Cooling system: 16,1 liters (4.2 US gallons)
Engine oil with filter: 7,3 liters (1.9 US gallons)
Brake: 0,3 liters (0.08 US gallons)
Axle: 2,7 liters (0.71 US gallons)
Water (spray) tank: 394 liters (104 US gallons)


ELECTRICAL SYSTEM:

24-volt electrical system includes two maintenance-free Cat batteries, colorcoded and numbered wiring wrapped in nylon braid. A 55-amp alternator powers the electrical system.


DIMENSIONS:

Length: 4.29 m (14' 1")
Wheel base: 3.34 m (10' 11")
Compaction width: 1.74 m (5' 8")
Height at steering wheel: 2.32 m (7' 7")
Height at ROPS: 3.0 m (9' 10")
Tire overlap: 13 mm (0.5")
Outside turning radius: 6.45 m (21' 2")
Inside turning radius: 4.64 m (15' 3")
Oscillation angle: ±4.4 degrees
Ground clearance 267 mm (10.5")


w/11-wheel option:
Compaction width: 2.13 m (6' 11")
Inside turning radius: 4.44 m (14' 7")


WHEELS AND TIRES:

Number of wheels - front: 5
Number of wheels - rear: 4

6-Ply: 8.50/90 x 15

11-wheel option:
6-Ply: 8.50/90 x 15


SPEED - forward and reverse:

Low: 0 - 11 km/h (6.8 mph)
High: 0 - 18.5 km/h (11.5 mph)
Maximum travel speed: 25.6 km/h (15.9 mph)


OPERATINTG WEIGHTS:

PS150C:
Total weight without ballast: 4885 kg (10,775 lb)
Maximum water ballast: 3825 kg (8,430 lb)
Total weight with maximum water ballast: 8710 kg (19,205 lb)
Maximum wet sand ballast: 8055 kg (17,760 lb)
Total weight with maximum wet sand ballast: 12 940 kg (28,535 lb)


PS150C w/11-Wheel Option:
Total weight without ballast: 4955 kg (10,925 lb)
Maximum water ballast: 3825 kg (8,430 lb)
Total weight with maximum water ballast: 8780 kg (19,355 lb)
Maximum wet sand ballast: 8055 kg (17,760 lb)
Total weight with maximum wet sand ballast: 13 010 kg (28,685 lb)


PS150C w/Heavy Weight Option:
Total weight without ballast: 4955 kg (10,925 lb)
Maximum water ballast: 3825 kg (8,430 lb)
Total weight with maximum water ballast: 8780 kg (19,355 lb)
Maximum wet sand ballast: 8055 kg (17,760 lb)
Total weight with maximum wet sand ballast: 13 010 kg (28,685 lb) Total weight with 12 307 kg (27,075 lb) iron and wet sand ballast: 17 273 kg (38,000 lb)


PS150C w/Heavy Weight Option and 11-Wheel Option:
Total weight without ballast: 5025 kg (11,078 lb)
Maximum water ballast: 3825 kg (8,430 lb)
Total weight with maximum water ballast: 8850 kg (19,511 lb)
Maximum wet sand ballast: 8055 kg (17,760 lb)
Total weight with maximum wet sand ballast: 13 080 kg (28,836 lb)


BALLAST COMPARTMENTS:

Ballast capacities:
Primary 3,9 m3 (139 ft3)
Secondary 0,4 m3 (11 ft3)
Total 4,3 m3 (150 ft3)
Ballast materials:
0,028 m3 (1 ft3) of wet sand weighs 57 kg (125 lb)
0,028 m3 (1 ft3) of water weighs 28 kg (62.4 lb)


CAT PS150C pneumatic compactor
CAT PS150C pneumatic compactor.
Date of the photo: 25 August 2010
Size of the photo: 1705 × 1537 pixels, 1.96 MB
Author of the photo: Michael Quinn
License: (CC BY 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


CAT PS150C and CAT PS360C
CAT PS150C and CAT PS360C.
Project: Perform Preservation Treatment on approximately 130 Miles of Roads.
South Entrance Road chip sealing work, Grand Canyon National Park South Rim, USA.
Date of the photo: 25 August 2010
Size of the photo: 3000 × 2000 pixels, 1.73 MB
Author of the photo: Michael Quinn
Source: Grand Canyon National Park
License: (CC BY 2.0)


CATERPILLAR PS150C pneumatic compactor and two workers
CATERPILLAR PS150C pneumatic compactor and two workers.
Date of the photo: 25 August 2010
Size of the photo: 1397 × 1050 pixels, 1.16 MB
Author of the photo: Michael Quinn
License: (CC BY 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


Two CATERPILLAR PS150C pneumatic rollers at work
Two CATERPILLAR PS150C pneumatic rollers at work.
South Entrance Road chip sealing work, Grand Canyon National Park South Rim, USA.
Project: Perform Preservation Treatment on approximately 130 Miles of Roads.
Date of the photo: 25 August 2010
Size of the photo: 3000 × 2000 pixels, 1.52 MB
Author of the photo: Michael Quinn
Source: Grand Canyon National Park
License: (CC BY 2.0)


CATERPILLAR PS150C pneumatic roller
CATERPILLAR PS150C pneumatic roller.
Date of the photo: 25 August 2010
Size of the photo: 822 × 727 pixels, 389 kB
Author of the photo: Michael Quinn
License: (CC BY 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


Three CATERPILLAR pneumatic rollers at work
Three CATERPILLAR pneumatic rollers at work.
South Entrance Road chip sealing work, Grand Canyon National Park South Rim, USA.
Project: Perform Preservation Treatment on approximately 130 Miles of Roads.
Project overview: This project involves crack sealing, chip sealing, and restriping most of the paved roads on the North and South Rims of Grand Canyon National Park. Paved road surfaces should receive a pavement treatment on an approximately seven-year cycle to sustain the integrity of the road surface and increase the roadway’s life span. This sealcoat will assure at least seven or more years of service without having to reconstruct the sub base and resurface the asphalt.
Date of the photo: 25 August 2010
Size of the photo: 3000 × 2000 pixels, 1.19 MB
Author of the photo: Michael Quinn
Source: Grand Canyon National Park
License: (CC BY 2.0)





CATERPILLAR - PNEUMATIC ROLLERS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.