www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


CATERPILLAR - GRADERS


CATERPILLAR 140H (Model 2002)

TECHNICAL DATA AND PHOTOS

Class: Three Axle Motor Grader

Type: CAT 140H (Model 2002)

Years of production: 2002 - 2007

Manufacturer: CATERPILLAR


ENGINE

Model: Cat 3176 ETA, VHP
VHP = Variable Horse Power
Type: Inline, water-cooled, four-stroke, turbocharged and air-to-air aftercooled diesel engine.
Number of cylinders: 6
Displacement: 10.3 L (629 in3)
Bore: 125 mm (4.9 in)
Stroke: 140 mm (5.5 in)

Base Power (all gears) Net: 123 kW (165 hp)

VHP - gears 1-3 Net: 123 kW (165 hp)
VHP - gears 4-8 Net: 138 kW (185 hp)

VHP Plus - gears 1-3 Net 123 kW (165 hp)
VHP Plus - gears 4-6 Net 138 kW (185 hp)
VHP Plus - gears 7-8 Net 153 kW (205 hp)

Base Power (all gears) Gross: 136 kW (182 hp)

VHP - gears 1-3 Gross 136 kW (182 hp)
VHP - gears 4-8 Gross 151 kW (202 hp)

VHP Plus - gears 1-3 Gross 136 kW (182 hp)
VHP Plus - gears 4-6 Gross 151 kW (202 hp)
VHP Plus - gears 7-8 Gross 166 kW (222 hp)

Torque rise: 50 %
Maximum torque at 1000 rpm: 1095 N.m (808 lb ft)
Speed at rated power: 2000 rpm
Derating altitude: 3048 m (10,000 ft)

Std. - Fan speed:
Maximum: 1210 rpm
Minimum: 500 rpm

Std. - Ambient Capability: 47°C (117°F)

Hi Ambient - Fan speed:
Maximum: 1300 rpm
Minimum: 500 rpm

Hi - Ambient Capability: 50°C (122°F)

Emissions: U.S. EPA Tier II and EU Stage II


TRANSMISSION

Type: Direct drive, power shift.

Number of gears:
Forward: 8
Reverse: 6

Speeds:

Forward:
1st: 3.8 km/h (2.3 mph)
2nd: 5.1 km/h (3.2 mph)
3rd: 7.4 km/h (4.6 mph)
4th: 10.3 km/h (6.4 mph)
5th: 16.2 km/h (10.0 mph)
6th: 22 km/h (13.7 mph)
7th: 30.3 km/h (18.8 mph)
8th: 44 km/h (27.4 mph)

Reverse:
1st: 3 km/h (1.8 mph)
2nd: 5.6 km/h (3.5 mph)
3rd: 8.1 km/h (5.0 mph)
4th: 12.8 km/h (7.9 mph)
5th: 23.9 km/h (14.8 mph)
6th: 34.7 km/h (21.6 mph)


MAXIMUM SPEED

Forward: 44 km/h (27.4 mph)
Reverse: 34.7 km/h (21.6 mph)


FLUID CAPACITIES

Engine Oil: 39 L (10.2 US gal)
Cooling System: 38 L (10 US gal)
Hydraulic system - total 80 L (20.8 US gal)
Hydraulic system - tank 38 L (9.9 US gal)
Differential/Final drives: 47 L (12.4 US gal)
Tandem housing (each): 64 L (16.9 US gal)
Circle drive housing: 7 L (1.8 US gal)
Front wheel spindle bearing housing: 0.5 L (0.13 US gal)
Fuel tank: 397 L (105 US gal)


HYDRAULIC SYSTEM

Circuit type: Closed center load sense.
Pump type: axial piston
Pump output at 2100 rpm: 206 L/min (54.4 US gal/min)
Maximum system pressure: 24 150 kPa (3,500 psi)
Reservoir tank capacity: 38 L (9.9 US gal)
Standby pressure: 3100 kPa (450 psi)


ELECTRICAL SYSTEM

Voltage: 24 V
Batteries, maintenance free: 750 CCA
Alternator: 75 A
Kill switch, external
Lights, stop and tail
Motor, starting
Product Link connection
Alarm, back-up


BRAKES

Service: Air actuated, oil-disc.
Service, surface area: 23 948 cm2 (3,712 in2)
Parking: Manual, multiple oil-disc.
Secondary: Air actuated, oil-disc.
Brakes meet the following standards: SAE J1473 OCT 90.


OPERATING SPECIFICATIONS

Turning Radius, outside front tires: 7.5 m (24.6 ft)
Steering Range – left/right: 50°
Articulation Angle – left/right: 20°


MOLDBOARD

Blade width: 3658 mm (12 ft)
Moldboard height: 610 mm (24 in)
Thickness: 22 mm (0.87 in)
Arc radius: 413 mm (16.25 in)
Throat clearance: 120 mm (4.7 in)

Cutting edge:
Width: 152 mm (6 in)
Thickness: 16 mm (0.63 in)

End bit:
Width: 152 mm (6 in)
Thickness: 16 mm (0.63 in)

Blade pull:
Maximum GVW: 19 135 kg (42,184 lb)
Base GVW: 13 209 kg (29,121 lb)

Down pressure:
Maximum: GVW 13 017 kg (28,698 lb)
Base GVW: 7098 kg (15,648 lb)

Blade Pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Vehicle Weight (GVW).


FRAME

Circle:
Diameter: 1530 mm (60.2 in)
Blade beam thickness: 30 mm (1.2 in)

Drawbar:
Height: 127 mm (5 in)
Thickness: 76 mm (3 in)

Front-top/bottom plate:
Width: 305 mm (12 in)
Thickness: 25 mm (1 in)

Front-side plates:
Width 241 mm (9.5 in)
Thickness 12 mm (0.5 in)

Front-linear weights:
Minimum: 165 kg/m (112 lb/ft)
Maximum: 213 kg/m (144 lb/ft)

Front-section modulus:
Minimum: 2083 cm3 (127 in3)
Maximum: 4785 cm3 (291 in3)

Front axle:
Ground clearance: 625 mm (24.6 in)
Front wheel lean: 18°
Oscillation angle: 32°

TANDEMS

Height: 506 mm (19.9 in)
Width: 201 mm (7.9 in)

Sidewall thickness:
Inner: 16 mm (0.63 in)
Outer: 18 mm (0.71 in)

Drive chain pitch: 51 mm (2 in)
Wheel axle spacing: 1522 mm (60 in)

Tandem oscillation
Forward: 15°
Reverse: 25°


BLADE RANGE

Circle centershift:
Right: 728 mm (28.7 in)
Left: 695 mm (27.4 in)

Moldboard sideshift:
Right: 660 mm (26 in)
Left: 524 mm (20.6 in)

Maximum blade position angle: 90°
Blade tip range:
Forward: 40°
Backward: 5°

Maximum shoulder reach outside of tires:
Right: 1978 mm 77.9 in
Left: 1896 mm 74.6 in

Maximum lift above ground: 480 mm (18.9 in)
Maximum depth of cut: 715 mm (28.1 in)


RIPPER

Ripper shank holders: 5
Ripper shank holder spacing: 533 mm (21 in)
Ripping depth, maximum: 462 mm (18.2 in)
Penetration force: 8047 kg (17,740 lb)
Pryout force: 9281 kg (20,460 lb)


SCARIFIER - Front, V-Type
Scarifier shank holders: 11
Working width: 1184 mm (46.6 in)
Scarifying depth, maximum: 292 mm (11.5 in)
Scarifier shank holder spacing: 116 mm (4.6 in)

SCARIFIER - Front, straight:
Scarifier shank holders: 17
Working width: 1800 mm (71 in)
Scarifying depth, maximum: 317 mm (12.5 in)
Scarifier shank holder spacing: 111 mm (4.38 in)


SCARIFIER - Rear:
Scarifier shank holders: 9
Working width 2300 mm (91 in)
Ripping depth, maximum: 411 mm (16.2 in)
Scarifier shank holder spacing: 267 mm (10.5 in)


DIMENSIONS

Length:
Between tandem axles: 1523 mm (60 in)
Front axle to moldboard: 2561 mm (100.8 in)
Front axle to mid tandem: 6169 mm (242.9 in)
Front tire to end of rear frame: 8713 mm (343 in)
Counterweight to ripper: 10 097 mm (398 in)

Cab height:
Low profile cab: 3131 mm (123 in)
High profile cab: 3356 mm (132 in)
No cab: 3103 mm (122.2 in)

Height:
To exhaust stack: 3103 mm (122.2 in)
Height to top of cylinders: 3028 mm (119.2 in)

Width:
Tire center lines: 2077 mm (81.8 in)
Outside rear tires: 2443 mm (96.2 in)
Outside front tires: 2464 mm (97 in)

Height to axle 600 mm (23.6 in)
Ground clearance at trans. case: 344 mm (13.5 in)


WEIGHTS

Gross Vehicle Weight - Maximum:

Gross vehicle weight: 21 261 kg (46,872 lb)
Front wheels 7590 kg (16,733 lb)
Rear wheels 13 671 kg (30,139 lb)

Gross Vehicle Weight - Base:

Gross vehicle weight: 14 677 kg (32,357 lb)
Front axles: 4138 kg (9,123 lb)
Rear axles: 10 539 kg (23,234 lb)

Base operating weight calculated on standard machine configuration with 14.00-24 10PR (G-2) tires, full fuel tank, coolant, lubricants and operator.


CAT 140H (Model 2002) three axle motor grader
CAT 140H (Model 2002) three axle motor grader.
Location: Loveland, Colorado, USA.
Taken on: 2006
Size of the photo: 1584 x 1036 pixels, 333 kB
Author of the photo: Greg Goebel
License : (CC BY-SA 2.0)


CAT 140H (Model 2002) three axle motor grader
CAT 140H (Model 2002) three axle motor grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 3600 x 2400 pixels, 6.13 MB
Camera model: PANASONIC DMC-FZ50
Author of the photo: © Oto Zapletal


CATERPILLAR 140H (Model 2002) three axle motor grader
CATERPILLAR 140H (Model 2002) three axle motor grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 3600 x 2400 pixels, 4.32 MB
Camera model: PANASONIC DMC-FZ50
Author of the photo: © Oto Zapletal


CAT 140H grader
CAT 140H grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 3600 x 2400 pixels, 3.97 MB
Camera model: PANASONIC DMC-FZ50
Author of the photo: © Oto Zapletal


CATERPILLAR 140H (Model 2002) three axle motor grader
CATERPILLAR 140H (Model 2002) three axle motor grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 3600 x 2400 pixels, 6.47 MB
Camera model: PANASONIC DMC-FZ50
Author of the photo: © Oto Zapletal


Side view of the CAT 140H grader
Side view of the CAT 140H grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 3600 x 2400 pixels, 4.35 MB
Camera model: PANASONIC DMC-FZ50
Author of the photo: © Oto Zapletal


Side view of the CAT 140H three axle motor grader
Side view of the CAT 140H three axle motor grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 3600 x 2400 pixels, 6.69 MB
Camera model: PANASONIC DMC-FZ50
Author of the photo: © Oto Zapletal


Front view of the CAT 140H grader
Front view of the CAT 140H grader.
Construction of the D1 Motorway, Section: Hubová - Ivachnová, Slovakia.
Taken on: 5 June 2010
Size of the photo: 1311 x 1481 pixels, 1.39 MB Author of the photo: © Oto Zapletal


CAT 140H grader is working on a road
CAT 140H grader is working on a road.
U.S. Forest Service Road Maintenance Supervisor grades roads in the Whitetall Mountains of the Butte Ranger District of Beaverhead-Deerlodge National Forest Montana, USA.
Taken on: 13 September 2019
Size of the photo: 1920 x 1080 pixels, 1.82 MB
Author of the photo: USDA/Preston Keres
Source of the photo: U.S. Department of Agriculture


CAT 140H grader is working on a road
CAT 140H grader is working on a road.
U.S. Forest Service Road Maintenance Supervisor grades roads in the Whitetall Mountains of the Butte Ranger District of Beaverhead-Deerlodge National Forest Montana, USA.
Taken on: 13 September 2019
Size of the photo: 5184 x 3456 pixels, 3.79 MB
Camera model: Olympus E-M1 MarkII
Lens: OLYMPUS M.12-100mm F4.0
Author of the photo: USDA/Preston Keres
Source of the photo: U.S. Department of Agriculture


CAT 140H grader is working in a forest
CAT 140H grader is working in a forest.
U.S. Forest Service Road Maintenance Supervisor grades roads in the Whitetall Mountains of the Butte Ranger District of Beaverhead-Deerlodge National Forest Montana, USA.
Taken on: 13 September 2019
Size of the photo: 5184 x 3456 pixels, 2.98 MB
Camera model: Olympus E-M1 MarkII
Lens: LEICA DG 100-400/F4.0-6.3
Author of the photo: USDA/Preston Keres
Source of the photo: U.S. Department of Agriculture




CATERPILLAR - GRADERS




VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.