www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


CATERPILLAR - CRAWLER EXCAVATORS



CAT 215D LC



TECHNICAL DATA AND PHOTOS




Manufacturer: CATERPILLAR

Model: 215 D LC

D = series D
LC = Long carriage


Type: Crawler hydraulic excavator.

Years of production: 1989 - 1992


ENGINE

Model: CAT 3304
Type: In-line, four-stroke turbocharged diesel engine.
Cooling: water-cooled
Fuel system: direct injection
Net power:
SAE J1349: 93 kW (125 HP) at 1800 rpm
Number of cylinders: 4
Displacement: 7.0 L (425 in3)
Bore: 121 mm (4.75 in)
Stroke: 152 mm (6.0 in)


ELECTRICAL SYSTEM

Electric starter: 24 V
Batteries: 2 x 132 Ah, 12 V
Alternator: 50 A


HYDRAULIC SYSTEM

Two variable displacement piston pumps power the boom, stick, bucket, swing and travel circuits.

Output of each pump at 1800 engine rpm and 6895 kPa (69 bar, 1000 psi):

Maximum flow: 2 x 166 L/min (2 x 43 gpm)

A fixed-displacement gear pump powers the pilot control ciruit.

Output to pilot system at rated engine speed and 1900 kPa (19 bar, 275 psi):
58.3 L/min (15.4 gpm)

Oil-to-air hydraulic cooler is mounted in front of engine radiator.

Relief valve settings:
Implement circuits: 303 bar (4400 psi
Travel circuits: 331 bar (4800 psi)
Heavy lift circuits: 331 bar (4800 psi)
Swing circuit: 138 bar (2000 psi)
Pilot circuit: 23 bar (335 psi)


CYLINDERS:

Boom cylinders (2x):
Bore: 120.7 mm (4.75 in)
Stroke: 975 mm (38.4 in)

Stick cylinder:
Bore: 139.7 mm (5.5 in)
Stroke: 1207 mm (47.5 in)

Bucket cylinder:
Bore: 120.7 mm (4.75 in)
Stroke: 967 mm (38.1 in)


SWING MECHANISM:
Smooth, modulated deceleration occurs when swing control lever is released, assuring accurate positioning for next work cycle.

Swing speed: 6.7 rpm



DRIVE:
Full hydraulic; each track is driven by an independend hydraulic motor.
Triple-reduction, spur-gear final drive, fully enclosed, splash lubricated.
Duo-Cone Floating Ring Seals on output shaft.

Maximum drawbar pull: 147 kN (33,075 lb)

Maximum travel speed: 3.6 km/h (2.2 mph)


FLUID CAPACITIES

Engine oil: 19 L (5 US gal)
Cooling system: 27 L (7 US gal)
Swing drive: 29 L (7.7 US gal)
Final drives (each) 15 L (4 US gal)
Hydraulic system: 300 L (79.3 US gal)
Hydraulic tank: 155 L (41 US gal)
Fuel tank: 270 L (71 US gal)


DIMENSIONS:

Height to top of cab: 3100 mm (10'2")

Height to top of boom (shipping height):
With one-piece boom:
With 1800 mm (5'11") stick: 3200 mm (10'6")
With 2200 mm (7'3") stick: 3200 mm (10'6")
With 2800 mm (9'2") stick: 3380 mm (11'1")

Shipping length:
With one-piece boom:
With 1800 mm (5'11") stick: 8930 mm (29'4")
With 2200 mm (7'3") stick: 8940 mm (29'4")
With 2800 mm (9'2") stick: 8970 mm (29'5")

With of body: 2440 mm (8'0")
Width of standard shoe: 500 mm (20")
Width of track, retracted (with 500 mm shoes): 2419 mm (7'11")
Track length: 4140 mm (13'7")
Tail swing radius: 2650 mm (8'10")
Counterweight clearance: 1050 mm (3'5")
Ground clearance: 460 mm (18")


UNDERCARRIAGE

Width of shoe - ground contact area:
500 mm (20") - 3.63 m2 (5,645 in2)
610 mm (24") - 4.43 m2 (6,890 in2)
705 mm (28") - 5.12 m2 (7,963 in2)
1015 mm (40") - 7.37 m2 (11,462 in2)

Width of track, retracted (with 500 mm shoes): 2419 mm (7'11")
Track gauge: Retracted: 1919 mm (6'4")
Extended: 2224 mm (7'4")
Track length: 4140 mm (13'7")
Ground clearance: 460 mm (18")
Number of shoes (each side): 51


WORKING RANGES with one-piece boom and stick 1800 mm (5'11")

Maximum loading height: 5590 mm (18'4")
Maximum reach at ground level: 8370 mm (27'6")
Maximum digging depth: 5210 mm (17'1")
Maximum vertical Wall digging depth: 3400 mm (11'2") Maximum bucket hinge pin height: 6940 mm (22'9") Maximum cutting height: 8010 mm (26'3") Stick force: 110.8 kN (24,890 lb)


WORKING RANGES with one-piece boom and stick 2200 mm (7'3")

Maximum loading height: 5590 mm (18'4")
Maximum reach at ground level: 8670 mm (28'5")
Maximum digging depth: 5610 mm (18'5")
Maximum vertical Wall digging depth: 3440 mm (11'3") Maximum bucket hinge pin height: 6940 mm (22'9") Maximum cutting height: 7940 mm (26'1") Stick force: 98.0 kN (22,030 lb)


WORKING RANGES with one-piece boom and stick 2800 mm (9'2")

Maximum loading height: 5840 mm (19'2")
Maximum reach at ground level: 9230 mm (30'8")
Maximum digging depth: 6210 mm (20'4")
Maximum vertical Wall digging depth: 3940 mm (12'11") Maximum bucket hinge pin height: 7190 mm (23'7") Maximum cutting height: 8190 mm (26'10") Stick force: 83.3 kN (18.750 lb)


BUCKETS

Trenching Buckets

Bucket capacities, heaped, SAE - buckets weight:

447 L (0.6 yd3) - 460 kg (1,015 lb)
601 L (0.8 yd3) - 540 kg (1,190 lb)
761 L (1.0 yd3) - 606 kg (1,335 lb)

Exavation Buckets

Bucket capacities, heaped, SAE - buckets weight:

765 L (1.0 yd3) - 615 kg (1,350 lb)
902 L (0.8 yd3) - 684 kg (1,500 lb)
1038 L (1.4 yd3) - 737 kg (1,625 lb)

Extreme Service Exavation Bucket

Bucket capacity, heaped, SAE - bucket weight:

779 L (1.0 yd3) - 771 kg (1,700 lb)


OPERATING WEIGHT
Includes lubricants, coolant, 50% fuel, 500 mm (20") triple grouser track shoes, one-piece boom, 2755 kg (6,075 lb) counterweight, 765 L (1.0 yd3) bucket and 75 kg (165 lb) operator.

With 1800 mm (5'11") stick: 19 930 kg (43,950 lb)
With 2200 mm (7'3") stick: 19 940 kg (43,960 lb)
With 2800 mm (9'2") stick: 20 100 kg (44,320 lb)

For 610 mm (24") triple grouser shoes - add 270 kg (595 lb)
For 610 mm (24") single grouser shoes - add 330 kg (728 lb)
For 705 mm (28") triple grouser shoes - add 510 kg (1124 lb)
For 1015 mm (40") triple grouser shoes - add 1270 kg (2800 lb)


CAT 215D LC crawler hydraulic excavator
CAT 215D LC crawler hydraulic excavator.
Taken on: July 1998
Size of the photo: 2289 1449 pixels, 1.74 MB
Source of the photo: Huhu Uet
License: (CC BY-SA 2.0)
The image was extracted from the original photo.
The original photo is under the photo.


Caterpillar 215D LC excavator
Caterpillar 215D LC excavator demolishing a house.
The former "Brun'sche" house in Tornescher Weg in Uetersen, Germany.
Taken on: July 1998
Size of the photo: 3424 2347 pixels, 3.98 MB
Source of the photo: Huhu Uet
License: (CC BY-SA 2.0)


The excavator demolishing the house
The excavator demolishing the house.
The former "Brun'sche" house in Tornescher Weg in Uetersen, Germany.
Taken on: July 1998
Size of the photo: 3420 2341 pixels, 4.06 MB
Source of the photo: Huhu Uet
License: (CC BY-SA 2.0)


The excavator demolishing the house
The excavator demolishing the house.
The former "Brun'sche" house in Tornescher Weg in Uetersen, Germany.
Taken on: July 1998
Size of the photo: 3351 2338 pixels, 3.08 MB
Source of the photo: Huhu Uet
License: (CC BY-SA 2.0)





CATERPILLAR - CRAWLER EXCAVATORS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.