www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


CATERPILLAR - CRAWLER DOZERS



CATERPILLAR D10T



TECHNICAL DATA AND PHOTOS



Manufacturer: Caterpillar Inc.
Type: large crawler dozer
Model: D10T

ENGINE:
Model: Cat C27 ACERT
Type: V-12, 4-stroke-cycle diesel
Number of cylinders: 12
Displacement 27 liters (1,647.6 in3)
Bore: 137.2 mm (5.4 in)
Stroke 152.4 mm (6 in)
Power:
Gross power SAE J1995: 482 kW (646 hp)
Gross power ISO 14396: 471 kW (632 hp)
Net power SAE J1349/ISO 9249 Min Fan: 450 kW (603 hp)
Net power SAE J1349/ISO 9249: 433 kW (580 hp)
Net power 80/1269/EEC: 433 kW (580 hp)
Engine ratings apply at 1,800 rpm.
No derating required up to 4572 m (15,000 ft) altitude.


FLUID CAPACITIES:
Engine crankcase with oil filters: 76 liters (20.1 gal)
Cooling system: 151 liters (39.9 gal)
Power train: 193 liters (51 gal)
Final drives (each): 23 liters (6.1 gal)
Roller frames (each): 64 liters (16.9 gal)
Pivot shaft compartment: 33 liters (8.7 gal)
Hydraulic tank: 144 liters (38 gal)
Fuel tank: 1204 liters (318 gal)


ELECTRICAL SYSTEM:
Alternator: 95 A
Batteries: 2 x 12 V, 200 Ah
Converters: 12 V, 10 A and 20 A
Lighting system: halogen (2 forward, 2 rear)


HYDRAULIC SYSTEM:
Pump type: gear
Lift cylinder flow: 404 liters/min (107 gal/min)
Tilt cylinder flow: 112 liters/min (30 gal/min)
Bulldozer relief valve setting: 18 790 kPa (2,725 psi)
Tilt cylinder relief valve setting: 20 340 kPa (2,950 psi)
Ripper (lift) relief valve setting: 18 790 kPa (2,725 psi)
Ripper (pitch) relief valve setting: 18 790 kPa (2,725 psi)
Hydraulic tank: 144 liters (38 gal)
Pump output measured at 1,800 rpm and 6895 kPa (1,000 psi).
Electro-hydraulic pilot valve assists operations of ripper and dozer controls.
Hydraulic system includes four valves for use with blade and ripper.
Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers.


OPERATING WEIGHT:
Operating weight includes hydraulic controls, blade tilt cylinder, full fuel tank, coolant, lubricants, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.

Operating weight with 10SU ABR blade and single-shank ripper:
66 451 kg (146,499 lb)

Operating weight with 10U ABR blade and single-shank ripper:
67 006 kg (147,723 lb)

Operating weight with 10SU ABR blade and multi-shank ripper:
67 302 kg (148,375 lb)


SHIPPING WEIGHT:
Shipping weight includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) ES shoes.
Shipping weight: 48 263 kg (106,402 lb)


DIMENSIONS:
Track gauge: 2 550 mm (100.4 in)
Width without trunnions 610 mm (24 in) ES: 3 292 mm (129.6 in)
Width over trunnions: 3 736 mm (147.1 in)
Height - FOPS cab: 4 098 mm (161.3 in)
Height - top of stack: 4 505 mm (177.4 in)
Height - ROPS/canopy: 4354 mm (171.4 in)
Length of track on ground: 3 872 mm (152.4 in)
Overall length basic tractor: 5339 mm (210.2 in)
Length basic tractor with drawbar: 5659 mm (222.8 in)
Overall length basic tractor with winch: 5744 mm (226.1 in)
Length with SU-Blade: 7 416 mm (292.0 in)
Length with U-Blade: 7 750 mm (305.1)
Length with single-shank ripper: 7 081 mm (278.8 in)
Length with multi-shank ripper: 7 241 mm (285.1 in)
Overall length with SU-Blade and single-shank ripper: 9 158 mm (360.6 in)
Ground clearance: 664 mm (26.1 in)


UNDERCARRIAGE:
Width of shoe: 610 mm (24 in)
Number of shoes (each side): 44
Number of rollers (each side): 8
Number of carrier rollers: 1 per side (optional)
Grouser height: 93 mm (3.7 in)
Pitch: 260 mm (10.2 in)
Track gauge: 2 550 mm (100.4 in)
Length of track on ground: 3 885 mm (12 ft 9 in)
Ground contact area: 4.7 m2 (7,326 in2)
Ground clearance: 615 mm (24.2 in)


MAXIMUM SPEED:
Forward: 12.7 km/h (7.9 mph)
Reverse: 15.8 km/h (9.8 mph)


BLADES:

Blade 10SU ABR:
Blade capacity (SAE J1265): 18.5 m3 (24.2 yd3)
Width with blade (over end bits): 4860 mm (15 ft 11 in)
Blade height: 2 120 mm (83.5 in)
Maximum digging depth: 674 mm (26.5 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 993 mm (39.1 in)
Weight without hydraulic controls: 10 229 kg (22,551 lb)

Blade 10U ABR:
Blade capacity (SAE J1265): 22.0 m3 (28.7 yd3)
Width with blade (over end bits): 5 260 mm (207.1 in)
Blade height: 2 120 mm (83.5 in)
Maximum digging depth: 674 mm (42.3 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 1074 mm (39.1 in)
Weight without hydraulic controls: 10 784 kg (23,775 lb)


RIPPERS:

Single-Shank, Adjustable Parallelogram:
Number of pockets: 1
Added length: 1760 mm (5 ft 9 in)
Maximum penetration (standard tip): 1494 mm (58.8 in)
Maximum penetration force (shank vertical): 205 kN (46,086 lb)
Pry out force: 415.3 kN (93,363 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 1058 mm (41.7 in)
Weight (without hydraulic controls): 7117 kg (15,690 lb)

Multi-Shank, Adjustable Parallelogram:
Number of pockets: 3
Added length: 1760 mm (5 ft 10 in)
Overall beam width: 2920 mm (115 in)
Maximum penetration (standard tip): 876 mm (34.5 in)
Maximum penetration force (shank vertical): 205 kN (46,086 lb)
Pry out force: 415.3 kN (93,363 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 1045 mm (41.1 in)
Weight (one shank, without hydraulic controls): 7968 kg (17,566 lb)


CAT D10T large crawler dozer with SU blade and multi-shank ripper
The CAT D10T large crawler dozer with the SU blade and the multi-shank ripper.
Owner: Granite Construction Company.
Excavation of the auxiliary spillway at Folsom Dam in Folsom, California, USA.
Date of the photo: 16 June 2011
Size of the photos: 3444 2396 pixels, 5.53 MB
U.S. Army photo by Michael J. Nevins
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


The CAT D10T large crawler dozer of Granite Construction Company
The CAT D10T large crawler dozer of Granite Construction Company.
Excavation of the auxiliary spillway at Folsom Dam in Folsom, California, USA.
Date of the photo: 16 June 2011
Size of the photos: 1920 1080 pixels, 1.70 MB
U.S. Army photo by Michael J. Nevins
Changes made: The image was extracted from the original photo, contrast
The original photo is under the photo.


CAT D10T large crawler dozer with SU blade and multi-shank ripper
The CATERPILLAR D10T large crawler dozer at work.
Excavation of the auxiliary spillway at Folsom Dam in Folsom, California, USA.
Date of the photo: 16 June 2011
Size of the photos: 5616 3744 pixels, 10.0 MB
Camera model: Canon EOS 5D Mark II
U.S. Army photo by Michael J. Nevins


The CATERPILLAR D10T crawler dozer with the multi-shank ripper and the SU blade.
The CATERPILLAR D10T crawler dozer with the multi-shank ripper and the SU blade.
Owner: Granite Construction Company.
Excavation of the auxiliary spillway at Folsom Dam in Folsom, California, USA.
Date of the photo: 16 June 2011
Size of the photos: 2824 1657 pixels, 2.80 MB
U.S. Army photo by Michael J. Nevins
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


The large crawler dozer at work
The large crawler dozer at work.
Excavation of the auxiliary spillway at Folsom Dam in Folsom, California, USA.
The spillway will let Folsom Dam release water sooner and more safely. The project is part of the Folsom Dam Joint Federal Project, a joint effort of the U.S. Army Corps of Engineers Sacramento District, the U.S. Bureau of Reclamation, the Central Valley Flood Protection Board and the Sacramento Area Flood Control Agency to improve the safety of the dam and reduce flood risk for the greater Sacramento area.
Date of the photo: 16 June 2011
Size of the photos: 5616 3744 pixels, 8.82 MB
Camera model: Canon EOS 5D Mark II
U.S. Army photo by Michael J. Nevins





CATERPILLAR - CRAWLER DOZERS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.