www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


CATERPILLAR - CRAWLER DOZERS



CATERPILLAR D10T2



TECHNICAL DATA AND PHOTOS



Manufacturer: Caterpillar Inc.
Type: large crawler dozer
Model: D10T2

ENGINE: Tier 2 and Stage II Equivalent
Model: Cat C27 ACERT
Type: V-12, 4-stroke-cycle diesel
Power: FWD/REV
Gross SAE J1995: 470/571 kW (630/766 hp) at 1,800 rpm
ISO 14396: 462/562 kW (620/754 hp) at 1,800 rpm
Net SAE J1349/ISO 9249: 447/538 kW (600/722 hp) at 1,800 rpm
Bore: 137 mm (5.4 in)
Stroke: 152 mm (6.0 in)
Displacement: 27.0 liters (1,648 in3)
Number of cylinders: 12
No derating (in FWD gears) required up to 4572 m (15,000 ft) undercarriage altitude.

ENGINE: Tier 4 Final
Model: Cat C27 ACERT
Type: V-12, 4-stroke-cycle diesel
Power: FWD/REV
Gross SAE J1995: 471/571 kW (632/766 hp) at 1,800 rpm
ISO 14396: ISO 14396 462/562 kW (620/754 hp) at 1,800 rpm
Net SAE J1349/ISO 9249: 447/538 kW (600/722 hp) at 1,800 rpm
Bore: 137 mm (5.4 in)
Stroke: 152 mm (6.0 in)
Displacement: 27.0 liters (1,648 in3)
Number of cylinders: 12
No derating (in FWD gears) required up to 4572 m (15,000 ft) undercarriage altitude.


FLUID CAPACITIES:
Engine crankcase with oil filters: 68 liters (18 gal)
Cooling system: 180 liters (47.6 gal)
Power train: 230 liters (60.8 gal)
Final drives (each): 23 liters (6.1 gal)
Roller frames (each): 64 liters (16.9 gal)
Pivot shaft compartment: 33 liters (8.7 gal)
Hydraulic tank: 131 liters (34.6 gal)
Fuel tank: 1190 liters (314.4 gal)


ELECTRICAL SYSTEM:
Alternator: 150 A
Batteries: 2 x 12 V, 200 Ah
Converters: 12 V, 10 A and 20 A
Lighting system: 8 halogen


OPERATING WEIGHT:
Operating weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, dual tilt, fast fuel, 610 mm (24 in) ES shoes, and operator.

Operating weight with 10U ABR blade and single-shank ripper: 71 515 kg (157,663 lb)

Operating weight with 10SU ABR blade and Single-shank Standard riper: 70 171 kg (154,700 lb)

Operating weight with 10SU ABR blade and Single-shank Deep riper: 70 329 kg (155,049 lb)

Operating weight with 10SU ABR blade and + Multi-shank Standard riper: 69 858 kg (154,011 lb)

Operating weight with 10SU ABR blade and + Multi-shank Deep riper: 70 056 kg (154,447 lb)


SHIPPING WEIGHT:
Shipping weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
Shipping weight: 49 793 kg (109,775 lb)


HYDRAULIC SYSTEM:
Pump type: variable displacement piston
Combined pump output (implement) 380 liters/min (100.4 gal/min)
Bulldozer relief valve setting: 28 000 kPa (4,061 psi)
Tilt cylinder relief valve setting: 20 300 kPa (2,944 psi)
Ripper (lift) relief valve setting: 28 000 kPa (4,061 psi)
Ripper (pitch) relief valve setting: 28 000 kPa (4,061 psi)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Pump output measured at 1,800 rpm engine speed.


DIMENSIONS:
Track gauge: 2 550 mm (100.4 in)
Width without trunnions 610 mm (24 in) ES: 3 292 mm (129.6 in)
Width over trunnions: 3 736 mm (147.1 in)
Height includes grouser height for total dimensions on hard surfaces:
Height - FOPS cab: 4 098 mm (161.3 in)
Height - top of stack: 4 356 mm (171.5 in)
Height - ROPS/canopy: 4 406 mm (173.5 in)
Length of track on ground: 3 880 mm (152.8 in)
Overall length basic tractor: 5 324 mm (209.6 in)
Length basic tractor with drawbar: 5 598 mm (220.4 in)
Length with SU-Blade: 7 416 mm (292.0 in)
Length with U-Blade: 7 750 mm (305.1)
Length with single-shank ripper: 7 081 mm (278.8 in)
Length with multi-shank ripper: 7 241 mm (285.1 in)
Overall length with SU-Blade and single-shank ripper: 9 158 mm (360.6)
Ground clearance includes grouser height for total dimensions on hard surfaces: 725 mm (28.5 in)


UNDERCARRIAGE:
Width of shoe: 610 mm (24 in)
Number of shoes (each side): 44
Number of rollers (each side): 8
Number of carrier rollers (each side): 1 (optional)
Grouser height: 93 mm (3.7 in)
Pitch: 260 mm (10.25 in)
Track gauge: 2 550 mm (100.4 in)
Length of track on ground: 3 880 mm (152.8 in)
Ground contact area: 4.74 m2 (7,347 in2)
Ground clearance: 725 mm (28.5 in)


MAXIMUM SPEED:
Forward: 12.7 km/h (7.9 mph)
Reverse: 15.8 km/h (9.8 mph)


BLADES:

Blade 10SU ABR:
Blade capacity (SAE J1265): 18.5 m3 (24.2 yd3)
Width with blade (over end bits): 4 940 mm (194.5 in)
Blade height: 2 120 mm (83.5 in)
Maximum digging depth: 674 mm (26.5 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 993 mm (39.1 in)
Weight (does not include hydraulic controls but includes blade cylinders): 11 069 kg (24,403 lb)

Blade 10U ABR:
Blade capacity (SAE J1265): 22.0 m3 (28.7 yd3)
Width with blade (over end bits): 5 260 mm (207.1 in)
Blade height: 2 120 mm (83.5 in)
Maximum digging depth: 674 mm (42.3 in)
Ground clearance at full lift: 1 497 mm (58.9 in)
Maximum tilt: 1074 mm (39.1 in)
Weight (does not include hydraulic controls but includes blade cylinders): 12 413 kg (27,366 lb)


RIPPERS:

Single-shank Standard:
Maximum penetration force (shank vertical): 219 kN (49,233 lb)
Maximum penetration (standard tip): 1 504 mm (59.2 in)
Pryout force (multi-shank ripper with one tooth): 512 kN (115,102 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 912 mm (36 in)
Number of shank holes: 3
Weight (with one shank): 6 445 kg (14,209 lb)

Single-shank Deep:
Maximum penetration force (shank vertical): 236 kN (53,055 lb)
Maximum penetration (standard tip): 1 988 mm (78.3 in)
Pryout force (multi-shank ripper with one tooth): 510 kN (114,653 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 703 mm (27.7 in)
Number of shank holes: 3
Weight (with one shank): 6 599 kg (14,548 lb)

+ Multi-shank Standard:
Overall beam width: 2 920 mm (115 in) Maximum penetration force (shank vertical): 208 kN (46,760 lb)
Maximum penetration (standard tip): 950 mm (37.4 in)
Pryout force (multi-shank ripper with one tooth): 515 kN (115,777 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 1 055 mm (41.5 in)
Number of shank holes: 2
Weight (with one shank): 6 132 kg (13,519 lb)


+ Multi-shank Deep:
Overall beam width: 2 920 mm (115 in) Maximum penetration force (shank vertical): 229 kN (51,481 lb)
Maximum penetration (standard tip): 1 869 mm (73.6 in)
Pryout force (multi-shank ripper with one tooth): 513 kN (115,327 lb)
Maximum clearance raised (under tip, pinned in bottom hole): 1 055 mm (41.5 in)
Number of shank holes: 4
Weight (with one shank): 6 330 kg (13,955 lb)


CAT D10T2 dozer
CAT D10T2 dozer.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,70 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


CAT D10T2 large dozer
CAT D10T2 large dozer.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,71 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


Rear view of the CAT D10T2 dozer - single-shank ripper
Rear view of the CAT D10T2 dozer - single-shank ripper.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 1520 x 2688, 1,65 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


CATERPILLAR D10T2 dozer - single-shank ripper
CATERPILLAR D10T2 dozer - single-shank ripper.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,56 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


A detail of the CATERPILLAR D10T2 dozer
A detail of the CATERPILLAR D10T2 dozer.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,50 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


The CATERPILLAR D10T2 dozer and a man
The CATERPILLAR D10T2 dozer and a man.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,73 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


The CATERPILLAR D10T2 dozer and some men
The CATERPILLAR D10T2 dozer and some men.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,73 MB
Source of the photo: MINING.com
License: (CC BY 2.0)


The CAT D10T2 dozer and some men
The CAT D10T2 dozer and some men.
Caterpillar Tinaja Hills Demonstration & Learning Center.
Taken on: 5 May 2014
Size of the photo: 2688 x 1520, 1,67 MB
Source of the photo: MINING.com
License: (CC BY 2.0)





CATERPILLAR - CRAWLER DOZERS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.