www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


JOHN DEERE - CRAWLER EXCAVATORS



JOHN DEERE 200C LC




TECHNICAL DATA AND PHOTOS



Type: Crawler hydraulic excavator.

Model: 200C LC

Manufacturer: JOHN DEERE


ENGINE:
Model: John Deere 6068H
Type: Diesel, four-cycle engine
Rated power, SAE: 105 kW (141 hp) at 2150 rpm
Maximum net torque: 579 Nm (427 lb ft) at 1300 rpm
Displacement: 6.8 liters (414 cu in)
Number of cylinders: 6
Aspiration: turbocharged, air-to-air charge-air cooler.
Cooling fan: suction-type drive
Off-level capacity: 100% (45 deg)
Engine emissions: EPA Tier II non-road emissions regulations


ELECTRICAL SYSTEM:

Voltage: 24 V
Alternator: 45 A
Batteries: 2 x 12 V, reserve capacity 180 min.


HYDRAULIC SYSTEM:

Main pumps: 2 variable-displacement axial-piston pumps
Minimum flow: 2 x 82 liters/min (2 x 21.5 gpm)
Maximum flow: 2 x 219 liters/min (2 x 57.9 gpm)

Pilot pump: 1 gear
Maximum flow: 36 liters/m (9.5 gpm)
Pressure setting: 3999 kPa (580 psi)

System operating pressure:
Circuits:
Implement: 34 336 kPa (4,980 psi)
Swing: 30 888 kPa (4,480 psi)
Travel: 34 336 kPa (4,980 psi)
Power boost: 36 336 kPa (5,270 psi)

HYDRAULIC CYLINDERS:

Boom:
Number of cylinders: 2
Bore: 120 mm (4.72 in)
Rod diameter: 85 mm (3.35 in)
Stroke: 1220 mm (48.03 in)

Arm:
Number of cylinders: 1
Bore: 135 mm (5.31 in)
Rod diameter: 95 mm (3.74 in)
Stroke: 1475 mm (58.07 in)

Bucket:
Number of cylinders: 1
Bore: 115 mm (4.53 in)
Rod diameter: 80 mm (3.15 in)
Stroke: 1060 mm (41.73 in)


FLUID CAPACITIES:

Cooling system: 23 liters (24.4 qt)
Engine lubrication, including filter: 19 liters (20 qt)
Hydraulic system: 200 liters (52.8 gal)
Hydraulic tank: 130 liters (34 gal)
Propel gearbox (each): 5.2 liters (5.5 qt)
Swing drive: 4.7 liters (5 qt)
Fuel tank: 360 liters (95 gal)


UNDERCARRIAGE:

Shoes: Triple semi-grouser shoes 600 mm (24 in)
Triple semi-grouser shoes 700 mm (28 in)
Triple semi-grouser shoes 800 mm (32 in)
Track guides: front and center
Track adjustment: hydraulic
Carrier rollers (per side): 2
Track rollers (per side): 8
Shoes, triple semi-grouser (per side): 49
Drawbar pull: 19 240 kg (42,420 lb)


TRAVEL SPEED:

Low: 3.6 km/h (2.2 mph)
High: 5.5 km/h (3.4 mph)


SWING MECHANISM:

Swing speed: 13.3 rpm
Swing torque: 58 640 Nm (43,218 lb-ft)


DIMENSIONS:
With arm length 2.22 m (7 ft 3 in)
Transport length: 9.62 m (31 ft 7 in)
Transport height: 3.13 m (10 ft 3 in)

DIMENSIONS:
With arm length 2.91 m (9 ft 7 in)
Transport length: 9.50 m (31 ft 2 in)
Transport height: 2.97 m (9 ft 9 in)


DIMENSIONS:
Cab height 2.95 m (9 ft 8 in)
Length to center of rollers: 3.66 m (12 ft)
Track length: 4.46 m (14 ft 8 in)
Counterweight clearance: 1030 mm (3 ft 5 in)
Ground clearance: 450 mm (1 ft 6 in)
Upperstructure width: 2.71 m (8 ft 11 in)
Track width:
With 600 mm (24 in) semi-grouser shoes: 2.99 m (9 ft 10 in)
With 700 mm (28 in) semi-grouser shoes: 3.09 m (10 ft 2 in)
With 800 mm (32 in) semi-grouser shoes: 3.19 m (10 ft 6 in)
Gauge width: 2.39 m (7 ft 10 in)
Tail swing radius: 2.75 m (9 ft)


WORKING RANGES:
With arm length 2.22 m (7 ft 3 in)

Maximum digging depth: 5.98 m (19 ft 7 in)
Maximum digging reach: 9.25 m (30 ft 4 in)
Maximum reach at ground level: 9.08 m (29 ft 9 in)
Maximum cutting height: 9.17 m (30 ft 1 in)
Maximum dumping height: 6.39 m (21 ft)
Arm force with 0.86 m3 (1.12 cu yd) general-purpose bucket: 131 kN (29,946 lb)
Bucket digging force with 0.86 m3 (1.12 cu yd) general-purpose bucket: 135.3 kN (30,410 lb)

WORKING RANGES:
With arm length 2.91 m (9 ft 7 in)

Maximum digging depth: 6.67 m (21 ft 11 in)
Maximum digging reach: 9.91 m (32 ft. 6 in)
Maximum reach at ground level: 9.75 m (32 ft)
Maximum cutting height: 9.60 m (31 ft 6 in)
Maximum dumping height: 6.78 m (22 ft 3 in)
Arm force with 0.86 m3 (1.12 cu yd) general-purpose bucket: 103.5 kN (23,250 lb)
Bucket digging force with 0.86 m3 (1.12 cu yd) general-purpose bucket: 135.3 kN (30,410 lb)


OPERATING WEIGHT:
With full fuel tank, 79 kg (175 lb) operator, 800 mm (32 in) triple semi-grouser shoes, 2.91 m (9 ft 7 in) arm, 0.86 m3 (1.12 cu) general-purpose bucket and 4658 kg (10,270 lb) counterweight.

Operating weight: 20 925 kg (46,130 lb)


BUCKETS:
Heavy duty plate lip: 0.45 m3 (0.59 cu yd) - 0.99 m3 (1.30 cu yd)
Heavy duty high capacity: 0.56 m3 (0.73 cu yd) - 1.06 m3 (1.38 cu yd)
Severe duty cast lip: 0.45 m3 (0.59 cu yd) - 0.73 m3 (0.95 cu yd)
Severe duty plate lip: 0.59 m3 (0.77 cu yd) - 0.73 m3 (0.95 cu yd)
Ditching: 0.69 m3 (0.90 cu yd) - 0.81 m3 (1.06 cu yd)


JOHN DEERE 200C LC military hdraulic excavator in Fallujah, Iraq.
JOHN DEERE 200C LC military hdraulic excavator in Fallujah, Iraq.
Seabees assigned to Naval Mobile Construction Battalion Four Zero (NMCB-40) were tasked with rebuilding a damaged bridge used heavily by Iraqi citizens. NMCB-40 is currently deployed providing support to Coalition Multi-National Forces throughout Iraq.
Taken on: 16 June 2006
Camera model: Canon EOS-1D Mark II N
Size of the photo: 3124 × 2336 pixels, 1.31 MB
Author of the photo: U.S. Navy photo by Photographer's Mate 3rd Class John P. Curtis.



JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 1552 x 1131 pixels, 1.41 MB.
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 2048 x 1536 pixels, 726 kB.
Camera model: Olympus C740UZ
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)



JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 1920 x 1080 pixels, 1.65 MB.
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 2048 x 1536 pixels, 731 kB.
Camera model: Olympus C740UZ
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)



JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 1600 x 900 pixels, 1.15 MB.
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)
Changes made: The image was extracted from the original photo.
The original photo is under the photo.


JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 2048 x 1536 pixels, 735 kB.
Camera model: Olympus C740UZ
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)



JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
JOHN DEERE 200C LC excavator loading VOLVO A30D articulated truck.
New World Mine Site near Cooke City, Montana, USA. Gallatin National Forest.
Taken on: 27 July 2009
Size of the photo: 2048 x 1536 pixels, 716 kB.
Camera model: Olympus C740UZ
Author of the photo: Forest Service Northern Region
License : (CC BY 2.0)



JOHN DEERE 200C LC military excavator in CHINHAE, Republic of Korea.
JOHN DEERE 200C LC military excavator in CHINHAE, Republic of Korea.
Seabees assigned to Naval Mobile Construction Battalion (NMCB) 1 level the land for a sports complex. The facility will include volleyball and tennis courts and will be used by more than 100 Sailors and their families stationed at Commander, Fleet Activities Chinhae (CFAC). CFAC is the only U.S. Navy base in the Republic of Korea.
Taken on: 26 August 2009
Camera model: NIKON D200
Size of the photo: 2100 × 1500 pixels, 893 kB
Author of the photo: U.S. Navy photo by Rey Rabara.



JOHN DEERE 200C LC military excavator at work ripping large rocks.
JOHN DEERE 200C LC military excavator at work ripping large rocks.
SANTA RITA, Guam (June 28, 2010) A Seabee assigned to Naval Mobile Construction Battalion (NMCB) 11 uses a backhoe to move material loosened by a blast at the Mineral Products Rock Quarry at U.S. Naval Base Guam. The blast, which took place June 25, was NMCB-11's first since taking charge of Camp Covington in May.
Taken on: 28 June 2010
Camera model: NIKON D70
Size of the photo: 2100 × 1396 pixels, 2.3 MB
Author of the photo: U.S. Navy photo by Rey Rabara.



JOHN DEERE 200C LC military excavator with hydraulic thumb at work
JOHN DEERE 200C LC military excavator with hydraulic thumb at work.
ROTA, Spain (Sept. 28, 2010) Equipment Operator 3rd Class Clayton Dalrymple, assigned to Naval Mobile Construction Battalion (NMCB) 7, operates a John Deere excavator to place riprap along a shoreline during a beach erosion control project at Naval Station Rota, Spain. Riprap is a protective foundation used for erosion prevention. NMCB-7 and its detachments are deployed to the U.S. 6th Fleet area of responsibility to provide construction and engineering support.
Taken on: 28 September 2010
Camera model: NIKON D300
Size of the photo: 2100 × 1500 pixels, 2.58 MB
Author of the photo: U.S. Navy photo by Chief Mass Communication Specialist Yan Kennon.



JOHN DEERE 200C LC excavator with hydraulic thumb at work.
JOHN DEERE 200C LC excavator with hydraulic thumb at work.
MINOT, N.D. — A U.S. Army Corps of Engineers St. Paul District contractor builds a ring dike around a temporary emergency levee here, June 5, 2011. Protecting human life is the Corps number one priority and the Corps continues to evaluate levees and reinforce them as needed.
Taken on: 5 June 2011
Size of the photo: 678 × 1024 pixels, 555 kB
Author of the photo: U.S. Army Corps of Engineers photo by Patrick Moes
Source: U.S. Army Corps of Engineers
License : (CC BY 2.0)


JOHN DEERE 200C LC military excavator at work ripping large rocks.
JOHN DEERE 200C LC military excavator with hydraulic hammer at work.
Marines with Marine Wing Support Squadron 272 and sailors from Naval Mobile Construction Battalion 7 excavate land for new living areas on the flightline at Camp Bastion, Afghanistan, June 23. Once completed, the project will include living areas, and dining and recreation facilities for Marines with 2nd Marine Aircraft Wing (Forward)’s aviation squadrons. “We are trying to give these Marines a closer place to live to their work areas,” explained Staff Sgt. Jefferson Brink, the project manager for Marine Wing Support Squadron 272.
Taken on: 23 June 2011
Camera model: Canon EOS 5D Mark II
Size of the photo: 4080 × 2720 pixels, 4.5 MB
Author of the photo: Cpl. Samantha H. Arrington






JOHN DEERE - CRAWLER EXCAVATORS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.