www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES



JOHN DEERE - ARTICULATED DUMP TRUCKS



DEERE 300D



TECHNICAL DATA AND PHOTOS




Manufacturer: JOHN DEERE

Model: 300D

Type: articulated dump truck (ADT)

Number of axles: 3

Number of wheels: 6

Number of tires: 6

Layout: Front-engine, all-wheel drive (6x6)


ENGINE

Model: John Deere PowerTech Plus 6090
Type: In-line, four-stroke, six-cylinder diesel engine.
Aspiration: Turbocharged and charge air cooled.
Cooling: Liquid cooled with single-pass radiator and remote pressurized coolant tank.
Fuel system: High-pressure common rail, 10/2-micron filtration, with water separator
Number of cylinders: 6
Valves per cylinder: 4
Number of valves: 24
Displacement: 9.0 L (549 cu.in.)
Bore: 118.4 mm (4.66 cu. in.)
Stroke: 136.0 mm (5.35 cu. in.)
Net peak power (ISO 9249): 285 hp (212 kW) at 2200 rpm
Net peak torque (ISO 9249): 789 lb.-ft. (1070 Nm) at 12001400 rpm
Air cleaner: Dual-element dry type with precleaner.
Fan drive: Direct viscous drive.
Cold start aid: Optional high-pressure ether.
Non-road emission standards: EPA Tier 3


TRANSMISSION

Model: ZF 6HP592C Ecomat 2+
Type: Fully automatic engine-mounted planetary, with lock-up torque converter, integral input retarder, and adaptive shift control.
Operator controls: Six-position lever gear select with gear-hold switch and retarder aggressiveness setting.

Speeds:

Forward:
1st: 7 km/h (4 mph)
2nd: 11 km/h (7 mph)
3rd: 19 km/h (12 mph)
4th: 27 km/h (17 mph)
5th: 38 km/h (24 mph)
6th: 50 km/h (31 mph)

Reverse: 8 km/h (5 mph)


ELECTRICAL SYSTEM

Voltage: 24 V
Alternator: 28 V, 80 A
Batteries: 2 x 12 V, 950 CCA



FLUID CAPACITIES:

Engine Oil: 25.5 L (6.7 US gal.)
Cooling system: 32.9 L (8.7 US gal.)
Transmission oil: 21.8 L (5.8 US gal.)
Transfer case oil: 4.7 L (5.0 qt.)
Hydraulic tank: 79.0 L (20.8 US gal.)
Axle oil (per axle): 22.0 l (5.8 US gal.)
Final drive: 4.0 L (4.2 qt.)
Fuel tank: 340.0 L (90.0 US gal.)


HYDRAULIC SYSTEM

Type: Closed-center, load-sensing system.
Main pump: Axial piston, variable displacement.
Dump cylinders: Single stage.
Flow: 184 L/min. (48.6 gpm) at high idle
Pressure: 25 MPa (3,625 psi)
Dump body control: electrohydraulic
Dump cylinders - cycle time:
Power down time: 6.0 seconds
Raise time: 11.9 seconds


PNEUMATIC SYSTEM

Configuration: Engine-mounted compressor, air drier with heater, and integral unloader valve.
System pressure: 118 psi (810 kPa)


STEERING SYSTEM

Type: Two hydraulic cylinders with ground-driven secondary steering pump.
Steering angle to either side: 45 degrees
Lock to lock turns: 4.1
Turning radius:
Inside: 4120 mm (13 ft. 6 in.)
Outside: 7980 mm (26 ft. 2 in.)


BRAKE SYSTEM

Service brakes: Dual-circuit hydraulically actuated dry-disc calipers on all axles, with mud guards.
Park and secondary brake: Spring-applied, air-released, driveline-mounted dry disc.
Auxiliary braking: Automatic transmission retarder.
Total retarding capacity (not including service brakes): 574 hp (428 kW)


AXLES

Input: spiral bevel
Differential: limited slip
Final drive: outboard planetary


SUSPENSION

Front: Maintenance-free quad rubber-mounted leading arm links and transverse link, supported by nitrogen/oil-filled struts.
Rear: Load-equalizing pivoting walking beams with laminated rubber suspension blocks; each axle coupled to chassis by four interchangeable rubber-bushed links.


TIRES

Size: 23.5R25
Type: radial earthmover
Maximum ground pressure (loaded middle axle): 22.1 psi (152 kPa)


DIMENSIONS

Overall length: 9580 mm (31 ft. 5 in.)
Overall height: 3480 mm (11 ft. 5 in.)
Width with mirrors in operating position: 3350 mm (11 ft. 0 in.)
Track width: 2360 mm (7 ft. 9 in.)
Maximum dump body height, dump position: 6200 mm (20 ft. 4 in.)
Dump body side rail height: 2740 mm (9 ft. 0 in.)
Front axle to mid axle centerline: 4170 mm (13 ft. 8 in.)
Mid axle to rear axle centerline: 1680 mm (5 ft. 6 in.)
Front axle centerline to front of machine: 2340 mm (7 ft. 8 in.)
Rear axle centerline to rear of dump body (transport position): 1400 mm (4 ft. 7 in.)
Approach angle: 30 degrees


DUMP BODY

Dump body length: 5210 mm (17 ft. 1 in.)
Dump body side rail height: 2740 mm (9 ft. 0 in.)
Maximum dump body height, dump position: 6200 mm (20 ft. 4 in.)
Capacity:
Struck: 12.6 m3 (16.5 cu. yd.)
Heaped at 2:1 ISO 6483 ratio: 16.6 m3 (21.7 cu. yd.)
With optional tailgate: 17.7 m3 (23.2 cu. yd.)
Heaped (SAE 1:1): 26.6 cu. yd. (20.3 m3)
Maximum dump angle 70 degrees


OPERATING WEIGHTS

Operating weight - empty: 19 500 kg (42,990 lb.)

Front axle: 10 410 kg (22,950 lb.)
Middle axle: 4550 kg (10,030 lb.)
Rear axle: 4540 kg (10,010 lb.)


Operating weight - loaded: 46 800 kg (103,180 lb.)

Rated payload: 27 300 kg (60,190 lb.)

Front axle: 14 050 kg (30,980 lb.)
Middle axle: 16 450 kg (36,270 lb.)
Rear axle: 16 300 kg (35,930 lb.)


DEERE 300D articulated dump truck
DEERE 300D articulated dump truck.
Location: Longmont, Colorado, USA.
Taken on: 2006
Size of the photo: 956 555 pixels, 165 kB
Author of the photo: Greg Goebel
License: (CC BY-SA 2.0)





JOHN DEERE - ARTICULATED DUMP TRUCKS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.