CommandView cab with ComfortCommand seat or Active Seat and CommandARM.
Implement Management System, Automatic PowerShift, Hitch Slip Command.
Corner Post, dashboard mini-pod, vehicle monitor, Hydraulic TouchSet panel, optional deluxe performance monitor.
Air Conditioning or optional Automatic Temperature Control.
Model: John Deere 6081H
Type: Vertical, in-line, four-stroke diesel engine.
Cooling fan drive: viscous
Air system: Dry filter with safety element and vacuum motor aspirated Strato-Tube pre cleaner.
Fuel injection system: High Pressure Common Rail, electronic injectors with variable injection timing and duration.
Control: Electronic injection control and electronic governing.
Displacement: 8.1 L (496 cu in)
Number of cylinders: 6
Bore: 116 mm (4.56 in)
Stroke: 129 mm (5.06 in)
Rated speed: 2200 RPM
Rated power (ECE-R24): 165 kW (225 HP)
Rated power (97/68/EC): 171 kW (233 HP)
Maximum power (ECE-R24): 183 kW (250 HP)
Maximum power (97/68/EC): 188 kW (256 HP)
Fuel consumption at best point: 200 g/kWh
Cooling system: 34 L (9.0 US gal)
Engine oil: 23.5 L (24.8 US qt)
Transmission, final drive and hydraulic oil: 140 L (37 US gal)
Front axle oil (differential and final drives): 10.4 L (11 US qt)
Fuel tank: 606 L (160 US gal)
16 Forward and 5 reverse full power shift speeds with fully automatic shifting and Field Cruise control.
Automatic Shifting Modes:
Automatic Draft, Transport and PTO. Shifting in relation to throttle reduction for transport and headland turns.
Shift under load Automatic, Manual, Skip-Shift or sequential shift, shuttle reversing.
Foot operated wet disc clutch for inching.
Number of field working speeds: 8
Speed range - forwards: 2 42 km/h
Speed range - reverse: 1.8 17 km/h
Hydrostatic power steering with ground drive back-up system.
Power brakes with oil cooled disc, hydraulically actuated and self equalising. Transmission Park lock and secondary hand brake.
Type: PFC System (pressure and flow compensating), load sensing with dedicated system pump.
Maximum pressure: 200 bar (2900 psi)
Maximum flow: 126 L/min (33.5 gpm) or optional 160 L/min (42.5 gpm)
Electro-Hydraulic Selective control valves:
Neutral, raise, lower and float. Adjustable flow with temperature compensation. Selectable detents. Load check valves and release assistors.
Maximum SCVs: 5
POWER TAKE-OFF (PTO)
Independent oil cooled multiple disc, electro-hydraulically engaged and braked.
1000 RPM, 20 spline 45 mm shaft or 2 speed dry change 1000 RPM and 540 RPM with 45 and 35 mm shafts.
Engine speed at standard PTO speeds:
1000 RPM at 2180 engine RPM
540 RPM at 1980 engine RPM
3-POINT HITCH REAR
Category 3N/3 with hook type draft link ends.
Electro-hydraulic with full electronic lower link draft sensing. Hitch dampening. External control switches.
Maximum lift capacity: 8400 kg (82.1 kN)
OECD lift capacity at 610 mm: 7638 kg (74.9 kN)
3-POINT HITCH FRONT - OPTIONAL
Category 3N with hook type draft link ends.
Electro-hydraulic, CommandARM control with full electronic integration with Implement Management System, External control switch.
Maximum lift capacity: 5,200 kg (51.0 kN)
INDEPENDENT LINK SUSPENSION (ILS) 4WD - OPTION
John Deere Independent upper and lower arms with integrated centre and outer final drives. Electro-hydraulic integrated management.
Hydro-pneumatic, permanent active, automatic levelling, automatic load compensation and draft active geometary for three point hitch implements.
Suspension range and cylinders:
± 125 mm at each wheel, 2 double acting hydraulic cylinders with suspension and rebound damping.
Electro-hydraulic differential lock, dual wheel capable, integrated transmission lubrication oil and integral high capacity balanced steering cylinder
DIMENSIONS With tyre size 600/70 R30 and 710/70 R38
Width: 2540 mm (100 in)
Height: 3150 mm (124 in)
Length: 5850 mm (230 in)
Wheelbase: 2960 mm (116.9 in)
Wheelbase (ILS): 2930 mm (115.7 in)
Minimum shipping weight: 9 000 kg (19,842 lbs)
Operating weight (with tyres 480/80R46 (duals)): 9092 kg (20,045 lb)
Maximum permissible weight for road: 14 000 kg (30,685 lbs)
John Deere 8220 tractor.
Taken on: 20 May 2011
Camera model: Pentax K-x
Size of the photo: 4288 x 2848, 9.06 MB
Author of the photo: Danny Canfield
License: (CC BY-ND 2.0)