www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


JOHN DEERE 8020 SERIES



JOHN DEERE WHEEL TRACTORS



John Deere 8320



Technical Data and Photos




Model: 8320 (8020 Series)

Manufacturer: John Deere

Factory: Waterloo, Iowa, USA.

Years of production: 2002 - 2005

Type: Four-wheel drive tractor

Layout: Front-engine, 4WD


CAB

CommandView cab with ComfortCommand seat or Active Seat and CommandARM.
Implement Management System, Automatic PowerShift, Hitch Slip Command.
Corner Post, dashboard mini-pod, vehicle monitor, Hydraulic TouchSet panel, optional deluxe performance monitor.
Air Conditioning or optional Automatic Temperature Control.


ENGINE

Model: John Deere 6081H
Type: Vertical, in-line, four-stroke diesel engine.
Aspiration: turbocharged
Cooling: liquid-cooled
Cooling fan drive: viscous
Air system: Dry filter with safety element and vacuum motor aspirated Strato-Tube pre cleaner.
Fuel injection system: High Pressure Common Rail, electronic injectors with variable injection timing and duration.
Control: Electronic injection control and electronic governing.

Compression: 16.5:1
Displacement: 8.1 L (496 cu in)
Number of cylinders: 6
Bore: 116 mm (4.56 in)
Stroke: 129 mm (5.06 in)

Operating speed: 1500-2200 RPM
Constant power range: 600 RPM
Torque reserve: 40%

Rated speed: 2200 RPM
Rated power (ECE-R24): 183 kW (250 HP)
Rated power (97/68/EC): 193 kW (263 HP)
Maximum power (ECE-R24): 203 kW (275 HP)
Maximum power (97/68/EC): 212 kW (288 HP)

Fuel consumption at best point: 198 g/kWh



FLUID CAPACITIES

Cooling system: 34 L (9.0 US gal)
Engine oil: 25 L (26.4 US qt)
Transmission, final drive and hydraulic oil: 140 L (37 US gal)
Front axle oil (differential and final drives): 10.4 L (11 US qt)
Fuel tank: 606 L (160 US gal)


TRANSMISSIONS

Automatic Powershift:
16 Forward and 5 reverse full power shift speeds with fully automatic shifting and Field Cruise control.

Automatic Shifting Modes:
Automatic Draft, Transport and PTO. Shifting in relation to throttle reduction for transport and headland turns.

Control:
Shift under load – Automatic, Manual, Skip-Shift or sequential shift, shuttle reversing.

Inching Pedal/Clutch:
Foot operated wet disc clutch for inching.


SPEED RANGES

Number of field working speeds: 8

Speed range - forwards: 2 – 42 km/h
Speed range - reverse: 1.8 – 17 km/h


BRAKES

Power brakes with oil cooled disc, hydraulically actuated and self equalising. Transmission Park lock and secondary hand brake.


STEERING

Hydrostatic power steering with ground drive back-up system.


INDEPENDENT LINK SUSPENSION (ILS) 4WD
Option

John Deere Independent upper and lower arms with integrated centre and outer final drives. Electro-hydraulic integrated management.

Hydro-pneumatic, permanent active, automatic levelling, automatic load compensation and draft active geometary for three point hitch implements.

Suspension range and cylinders:
± 125 mm at each wheel, 2 double acting hydraulic cylinders with suspension and rebound damping.

Performance features:
Electro-hydraulic differential lock, dual wheel capable, integrated transmission lubrication oil and integral high capacity balanced steering cylinder


HYDRAULIC SYSTEM

Type: PFC System (pressure and flow compensating), load sensing with dedicated system pump.
Maximum pressure: 200 bar (2900 psi)
Maximum flow: 126 L/min (33.5 gpm) or optional 160 L/min (42.5 gpm)
Electro-Hydraulic Selective control valves:
Neutral, raise, lower and float. Adjustable flow with temperature compensation. Selectable detents. Load check valves and release assistors.
Maximum SCV’s: 5


POWER TAKE-OFF (PTO)

Independent oil cooled multiple disc, electro-hydraulically engaged and braked.
1000 RPM, 20 spline 45 mm shaft or 2 speed dry change 1000 RPM and 540 RPM with 45 and 35 mm shafts.

Engine speed at standard PTO speeds:
1000 RPM at 2180 engine RPM
540 RPM at 1980 engine RPM


3-POINT HITCH – REAR

Category 3N/3 with hook type draft link ends.
Electro-hydraulic with full electronic lower link draft sensing. Hitch dampening. External control switches.

Maximum lift capacity: 9700 kg (95.2 kN)
OECD lift capacity at 610 mm: 9218 kg (90.4 kN)


3-POINT HITCH – FRONT - OPTIONAL

Category 3N with hook type draft link ends.
Electro-hydraulic, CommandARM control with full electronic integration with Implement Management System, External control switch.

Maximum lift capacity: 5,200 kg (51.0 kN)


DIMENSIONS
With tyre size 540/75 R34 and 650/85 R38

Width: 2540 mm (100 in)
Height: 3200 mm (126 in)
Length: 5850 mm (230 in)

Wheelbase: 2960 mm (116.9 in)
Wheelbase (ILS): 2930 mm (115.7 in)


WEIGHT

Minimum shipping weight: 9 000 kg (19,842 lbs)

Operating weight (with tyres 480/80R46 (duals)): 9085 kg (20,030 lbs)

Maximum permissible weight for road: 14 000 kg (30,685 lbs)


John Deere 8320 tractor with M&W 5000 rotary hoe
John Deere 8320 tractor with M&W 5000 rotary hoe, somewhere in the United States.
Taken on: 22 March 2008
Size of the photo: 1600 x 900, 1.17 MB
Author of the photo: Marie in NC
License of the photo: (CC BY 2.0)
Changes: This picture was extracted from the original photo, contrast changed.
The original photo is under the photo.


John Deere 8320 tractor with M&W 5000 rotary hoe in a field
John Deere 8320 tractor with M&W 5000 rotary hoe in a field, somewhere in the United States.
Taken on: 22 March 2008
Size of the photo: 2233 x 1487, 1.97 MB
Author of the photo: Marie in NC
License of the photo: (CC BY 2.0)



JOHN DEERE 8020 SERIES



JOHN DEERE WHEEL TRACTORS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.