www.vehicles-machines.eu

          HOME           BRANDS           PRODUCT LINES           OTHER           ABOUT           LINKS


MOTORCYCLES

CARS



BUSES

TROLLEYBUSES

TRAMS



TRUCKS

TRAILERS, SEMI-TRAILERS AND CONTAINERS

HANDLING MACHINES

CONSTRUCTION AND EARTHMOVING MACHINES



TRACTORS

AGRICULTURAL MACHINERY

FORESTRY MACHINERY



TRAINS



MILITARY VEHICLES AND HEAVY WEAPONS



AIRPLANES AND HELICOPTERS



SHIPS AND SUBMARINES


JOHN DEERE WHEEL TRACTORS



JOHN DEERE 8360R



TECHNICAL DATA AND PHOTOS




Model: 8360R (8R Series)

Manufacturer: JOHN DEERE

Type: Four-wheel drive tractor

Number of axles: 2

Number of tyres:
Standard: 4
Optional: 6 or 8

Layout: Front-engine, 4WD


ENGINE:

Model:
John Deere PowerTech PSX (B20 Diesel Compatible), Stage III B Emissions Certified
Type:
4-stroke cycle, in-line, wet-sleeve cylinder liners with 4 valves-in-head diesel engine
Aspiration:
Dual Series Turbocharger with fixed geometry first stage – variable geometry second stage – air-to-air aftercooling and cooled exhaust gas recirculation
Number of cylinders: 6
Displacement: 9.0 L
Bore: 118.4 mm
Stroke: 136 mm
Filter, engine air:
Dual stage with engine cooling fan aspiration
Cooling Fan Drive:
VariCool – variable speed cooling fan drive system
Fuel Injection System and Control: Electronically controlled, high-pressure CommonRail with electric fuel transfer pump (self priming)

Rated Speed: 2100 rpm

Rated Power (97/68 EC) without IPM:
265 kW (360 hp)
Maximum Power (97/68 EC) without IPM:
291 kW (396 hp) at 1900 rpm
Rated Power (97/68 EC) with IPM:
291 kW (395 hp)
Maximum Power (97/68 EC) with IPM:
301 kW (409 hp) at 1900 rpm

Rated Power (ECE-R24) without IPM:
254 kW (346 hp)
Maximum Power (ECE-R24) without IPM:
280 kW (380 hp) at 1900 rpm
Maximum Power (ECE-R24) with IPM:
289 kW (393 hp) at 1900 rpm

Engine Peak Torque: 1686 Nm at 1600 rpm

IPM - Intelligent Power Management


FLUID CAPACITIES:

Cooling System: 41.0 L
Crankshaft oil volume:
1500 MFWD: 28.0 L
ILS: 28.5 L
Transmission, Differential, Hydraulic System:
MFWD: 165 L
ILS: 175 L
1500 MFWD axle housing: 18.7 L
1500 MFWD and ILS wheel hubs, each: 3.8 L
Fuel Tank: 695 L


MFWD - ILS:

Advanced engineering in the John Deere 8R Series makes it easy to transport heavy loads while using less fuel. The Independent Link Suspension (ILS) with mechanical front wheel drive (MFWD) allows you to put more power to the ground – both in the fi eld and on the road.
Fuel efficiency is enhanced, as well. With 42 km/h AutoPowr transmission, the engine runs at only 1434 rpm. With 50 km/h AutoPowr transmission, only 1713 rpm are needed.


HYDRAULIC SYSTEM:

Type:
Closed-centre, PFC System (pressure & fl ow compensating) load sensing with dedicated axial piston type pump
Main pump, axial piston (displacement): 85 cm3
Maximum pressure: 204 bar (± 3 bar)
Rated Flow of pump: 227.1 L/min
Available Flow at a single SCV: 132 L/min
Selective control valves: 4 Standard, 3 and 5 Optional
Electro-hydraulic selective control valves:
Neutral, raise, lower and float. Adjustable flow with temperature compensation. Selectable detents. Load check valves and release assistors


3-POINT HITCH – REAR:

Type: Electro-hydraulic with full electronic lower link draft sensing. Hitch dampening. External fender mounted control switches

Category 4N/3 with Ball/Hook Style Ends – 120 mm Axle only

Sway Blocks or Deluxe Sway Stabilizers:
8,436 kg / 11,762 kg Maximum Hitch Lift Capacity


STEERING:

Standard:
Hydraulic Power-Steering with electric pump back-up:
406 mm Steering Wheel; Ratios/Turns Lock-to-Lock: -ILS 17.8:1 / 4.1, -1500 MFWD 20:1 / 4.4, -1300 MFWD 14.2:1 / 3.4


Optional:
ActiveCommand Steering (ACS) with electric pump back-up:
345 mm Steering Wheel, Variable ratio 15:1 to 23:1 (3.1 – 5.0 Turns Lock-to-Lock) with Dynamic Road Offset Control and passive tactile feedback


FRONT AXLES:

Suspension System:
Hydro-pneumatic, permanently active, automatic levelling, automatic load compensation and draft active geometry for 3-point hitch implements

Standard:
Independent Link Suspension with Hydraulic Differential Lock, Enclosed Driveline

Optional:
Independent Link Suspension with Hydraulic Differential Lock, Wet Multi-Disc Brakes and Enclosed Driveline: Available with 40 km/h, standard with 50 km/h transmission option


TRANSMISSION OPTIONS:

AutoPowr: Standard
Infinitely variable transmission with full electronic engine and transmission management, AutoClutch, PowerZero, variable reverser ratio and FieldCruise
JD AutoPowr:
0.05 – 42 km/h: Optional - 42 km/h at 1434 ECO engine rpm with group 48 tyres
JD AutoPowr 0.05 – 50 km/h:
Optional - 50 km/h at 1713 ECO engine rpm with group 48 tyres
Modes:
3 Modes – Auto Mode, Custom Mode & Manual Mode
Speed range:
Infinite – 50 m/h to 42 km/h or 50 km/h


DIMENSIONS:

Wheelbase:
MFWD: 3050 mm
ILS: 3020 mm

Ground Clearance:
MFWD axle clearance: 685.8 mm
ILS axle clearance: 590 mm

Turning Radius:
600/70R30 group 43 front tires at 74.1" spacing, ILS: 6.09 m

Width: 2506 mm
Height: 3285 mm
Length: 2506 mm
With rear tyre size (tire size optional available) 710/70R42
Measured from front weight support to the Cat 4 lower links in horizontal position.


WEIGHT:

ILS/IVT/645 kg inner weights/front weight support, Cat4 hitch with Ball/Hook style ends, 3 in 1 with Piton hitch, Tires: 710/70R42 rear singles, 600/70R30 front singles.

Average Standard Weight less front weights: 13,003 kg


CAB:

Type:
CommandView II Cab, with ComfortCommand Seat with adjustable right hand CommandARM Armrest Controls with integrated 7” Colour CommandCenter Display.

Optional:
Deluxe CommandView II cab or Premium CommandView II cab with John Deere ActiveSeat.

Optional:
CommandCenter TouchScreen 7” Colour Display & Video Ready.

Sound reduction/Drivers ear noise level (77/311/EEC):
Passive noise reduction system, 73 dB(A) in-cab sound level

Air System:
Manual Temperature control located in cab roof. Optional Automatic Temperature Control with controls located on CommandArm.

Cab Glass Area: 6.52 m2
Cab Volume: 3.597 m3


iTEC Pro productivity:

John Deere’s iTEC Pro system (intelligent Total Equipment Control) enables tractor operators to work faster and longer without tiring. As a result, owners benefit from comprehensive, highly automated operations for consistent quality of work, improved performance and the highest operator comfort.
The amount of work, time and costs savings are up to you:

1 - AutoTrac hands-free guidance reduces overlap by up to 90%.

2 - iTEC automates all machinery steps needed to accurately complete headland manoeuvres and is easily programmed or recorded via the CommandCenter display.

3 - iTEC Pro combines the functionality of both AutoTrac and iTEC to minimise overlap, cut input costs and help you work faster (available with GreenStar 2630 Display).

More hectares in less time.
All you need to do is define the accuracy of the correction signal you want to use with your StarFire 3000 or iTEC receiver to implement:

± 30 cm pass-to-pass accuracy with the FREE SF1 signal, perfect for tillage

± 10 cm pass-to-pass accuracy with the SF2 signal, ideal for fertiliser spreading and mowing.

± 2 cm repeatable RTK signal accuracy for the highest precision demands like seeding.


JOHN DEERE 8360R four-wheel drive tractor
JOHN DEERE 8360R four-wheel drive tractor.
Taken on: 16 February 2012
Size of the photo: 2064 × 1477 pixels, 2.00 MB
Author of the photo: MOs810
License: (CC BY-SA 3.0)
Changes made: The image was extracted from the original photo and contrast change.
The original photo is under this photo.


JOHN DEERE 8360R four-wheel drive tractor
JOHN DEERE 8360R four-wheel drive tractor, Targi Polagra 2012, Poznañ, Poland.
Taken on: 16 February 2012
Size of the photo: 2436 × 1651 pixels, 883 kB
Author of the photo: MOs810
License: (CC BY-SA 3.0)





JOHN DEERE WHEEL TRACTORS



VEHICLES-MACHINES


© VEHICLES-MACHINES.EU All rights reserved.